Safety Devices
Gate safety devices are safety mechanisms designed to prevent accidents and injuries involving gates. Some common gate safety devices include:
1. Gate sensors: These devices use infrared or motion detection technology to sense when an object or person is in the path of the gate, causing it to stop or reverse direction to prevent crushing injuries.
2. Gate edge sensors: These sensors are installed along the edges of the gate and detect any obstructions, triggering the gate to stop and reverse if necessary.
3. Photoelectric beams: These beams create an invisible barrier across the gate opening, and if broken by an object or person, will stop the gate from closing until the obstruction is removed.
4. Safety loops: These are embedded in the ground near the gate and sense the presence of vehicles or obstacles, causing the gate to remain open until the area is clear.
5. Emergency stop buttons: These manual controls allow users to instantly stop the gates movement in case of an emergency or when an obstruction is detected.
By incorporating these gate safety devices, property owners can help prevent accidents and injuries while ensuring the safe operation of their gates.
-
Diablo Controls DSP-19 Plug-in, Low Power & Mini-Loop Vehicle Detector
- The DSP-19 is specifically designed to be installed into a LiftMaster® model CSW24 operator or other models that use the same plug-in loop detector.
- The very low current draw and low voltage range is ideal for solar applications.
- Can be connected to a standard inductive loop or one of Diablo Controls free-exit probes.
- Can be used as either a safety loop or free exit loop detector.
- Flexibility to be either “fail-safe” or “fail-secure”.
diablo:dsp19 -
EMX IRB-EXP Explosion-Proof Photoeye
- Thru beam configuration
- Wide sensing angle for increased reliability
- 115 ft. operating range
- NEMA 4X enclosure
- Designed to operate in areas with explosive environments
- NEC Class I, Groups B, C & D, Class II, Groups E, F & G CSA certified, CENELEC certified, EExd IIC
- Copper free aluminum with epoxy finish
- Potentiometer range adjustment to allow for more precise tuning to site
- Thru beam design is not affected by shiny surfaces
- Modulated infrared to reduce the effect of sunlight, fog, rain, dust and dirt
- No focusing lens
emx:irbexp -
Diablo Controls XLP-8 Extreme Low Power Vehicle Detector
The XLP-8 is specifically designed as a small, simple to use, extremely low current draw, vehicle detector.
The XLP-8 is capable of using an inductive loop or a magnetometer sensor (a.k.a. Mini-Loop or Probe).
The extremely low power use (less than 1 milliamp) makes this detector ideal for solar and battery backed-up applications.
diablo:xlp8
Shop By
Shopping Options
My Wish List
Last Added Items
You have no items in your wish list.
