Safety Devices
Gate safety devices are safety mechanisms designed to prevent accidents and injuries involving gates. Some common gate safety devices include:
1. Gate sensors: These devices use infrared or motion detection technology to sense when an object or person is in the path of the gate, causing it to stop or reverse direction to prevent crushing injuries.
2. Gate edge sensors: These sensors are installed along the edges of the gate and detect any obstructions, triggering the gate to stop and reverse if necessary.
3. Photoelectric beams: These beams create an invisible barrier across the gate opening, and if broken by an object or person, will stop the gate from closing until the obstruction is removed.
4. Safety loops: These are embedded in the ground near the gate and sense the presence of vehicles or obstacles, causing the gate to remain open until the area is clear.
5. Emergency stop buttons: These manual controls allow users to instantly stop the gates movement in case of an emergency or when an obstruction is detected.
By incorporating these gate safety devices, property owners can help prevent accidents and injuries while ensuring the safe operation of their gates.
-
EMX IRB-RET2 Retro-Reflective Photoeye
UNIVERSAL UL325 RETROREFLECTIVE PHOTOEYE KIT
- Kit includes photoeye with hood, reflector with hood, and mounting bracket
- Retroreflective configuration
- UL325-2018 compliant
- Six (6) monitoring interfaces
- 60 ft. operating range
- Easy installation and set-up
- Compatible with many operators
emx:irbret2 -
All-O-Matic RED-K Photoelectric Sensor
AOM-RED EYE Features
- NC and 10K photo eye
- Visible red class2 laser beam with good aim allows installer to easily align with the reflector
- Excellent optical performance. Sensing range as far as 55 feet (100 feet with optional 4” square reflector)
- Non-sphere optical lens totally eliminates stray light and overcomes the interference from light sources (ie: sunlight)
- Red LED detects working status for easy installation and diagnosis LIGHT ON/DARK ON options
- Protection grade: IP65(IEC)
- UL325 compliant
aom:redeye -
EMX IRB-EXP Explosion-Proof Photoeye
- Thru beam configuration
- Wide sensing angle for increased reliability
- 115 ft. operating range
- NEMA 4X enclosure
- Designed to operate in areas with explosive environments
- NEC Class I, Groups B, C & D, Class II, Groups E, F & G CSA certified, CENELEC certified, EExd IIC
- Copper free aluminum with epoxy finish
- Potentiometer range adjustment to allow for more precise tuning to site
- Thru beam design is not affected by shiny surfaces
- Modulated infrared to reduce the effect of sunlight, fog, rain, dust and dirt
- No focusing lens
emx:irbexp -
LiftMaster LMRRUL Monitored Retro-Reflective Photo Eye
Versatile Solution for entrapment protection
Long-Range Sensing Distance of up to 50 ft
Built-In Heater for dependable performance in most environments
Increased Beam Angle for simple, reliable alignment
Versatile Gimble Bracket for fine alignment and adjustability
Warranty 2 yearsliftmaster:lmrrul
My Wish List
Last Added Items
You have no items in your wish list.
