Safety Devices
Gate safety devices are safety mechanisms designed to prevent accidents and injuries involving gates. Some common gate safety devices include:
1. Gate sensors: These devices use infrared or motion detection technology to sense when an object or person is in the path of the gate, causing it to stop or reverse direction to prevent crushing injuries.
2. Gate edge sensors: These sensors are installed along the edges of the gate and detect any obstructions, triggering the gate to stop and reverse if necessary.
3. Photoelectric beams: These beams create an invisible barrier across the gate opening, and if broken by an object or person, will stop the gate from closing until the obstruction is removed.
4. Safety loops: These are embedded in the ground near the gate and sense the presence of vehicles or obstacles, causing the gate to remain open until the area is clear.
5. Emergency stop buttons: These manual controls allow users to instantly stop the gates movement in case of an emergency or when an obstruction is detected.
By incorporating these gate safety devices, property owners can help prevent accidents and injuries while ensuring the safe operation of their gates.
-
Diablo Controls AVI-40 10 Pin Plug In Multiple Code Receiver
- Over 19,000 codes to choose from
- Can be programmed to accept up to 4 different codes
- Operates on 8 to 35 volts DC
- Can be field programmable with the “Learn” pushbutton
- No switches to set
- Small profile, perfect for many installations
- Responds to transmitters made by other manufacturers
diablo:avi40 -
iGAZE Safety Edge 3'
Traditional profile rubber edge is available in Normally Open option or compliant with UL 325 monitored 8.2K or 10K Resistive options. Designed out of a tough thermoplastic rubber, this edge will provide years of service. Mounts to gate with an aluminum channel. 3'
tms:safeedge3ft250 -
EMX DAK-2ULTMVP Dual-Zone Drive-Thru Alert Kit
- Ready to install, complete system
- Detect vehicles & alert staff
- Includes 2 induction loop sensors, 2 loop detectors, alert strobe/chime
- Pre-wired enclosure with components pre-installed
- Perfect all in one solution for applications requiring dual-zone detection and alert
emx:dak2ultmvp -
iGAZE Safety Edge 4'
Traditional profile rubber edge is available in Normally Open option or compliant with UL 325 monitored 8.2K or 10K Resistive options. Designed out of a tough thermoplastic rubber, this edge will provide years of service. Mounts to gate with an aluminum channel. 4'
tms:safeedge4ft -
iGAZE RE Safety Edge Transmitter
This transmitter is for adding to the receiver kit or for replacement of a damaged unit.
FEATURES:
Functions with mechanical & resistive edges simultaneously
65 feet of range between receiver & transmitter
2 Relay outputs
Battery powered transmitter with up to 5 years battery life
tms:igazeretul -
EMX IRB-RET2 Retro-Reflective Photoeye
UNIVERSAL UL325 RETROREFLECTIVE PHOTOEYE KIT
- Kit includes photoeye with hood, reflector with hood, and mounting bracket
- Retroreflective configuration
- UL325-2018 compliant
- Six (6) monitoring interfaces
- 60 ft. operating range
- Easy installation and set-up
- Compatible with many operators
emx:irbret2 -
EMX ULT-MVP-2U Two Channel Multi-Voltage Vehicle Detector
- Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
- Fits into small operator housings, saving space
- Easy to install and setup with the ULTRAMETER™ sensitivity display
- Low current draw – green product
- Easy identification of interference problems using the crosstalk and RFI interference display
emx:ultmvp2u
Shop By
Shopping Options
My Wish List
Last Added Items
You have no items in your wish list.
