Seco-Larm HL-951R2-SQ 900MHz RF 2-Channel Receiver
In stock
SKU
secolarm:hl951r2sq
$77.00
The ENFORCER 900MHz HL-series RF transmitters and receivers use digital modulation for improved immunity to interference, better signal penetration in environments with heavy obstructions, and a significantly longer range of up to 1,800ft (550m)* line of sight. The transmitter's ultra-low power consumption gives you longer battery life with easy to obtain coin-type batteries (CR-2032)
- 917MHz Frequency
- Wide voltage range, 10~24 VAC or 9~48 VDC, for more applicationsÂ
- Over 2.028x1031 (20.28 nonillion) possible codes to thwart code crackers and potential for duplicate codes
- PCB antenna – no external antenna to be installed, adjusted, vandalized, or damaged
- Five individually programmable output modes
- Up to 99 button codes per channel
- Available with 1 or 2 channels to control 1 or 2 devicesÂ
- Programming by switch, no need to cut jumpers
- LED Indicates RF reception and programming functions
- RF Signal strength / site survey test mode to find optimal installation location
- Compatible with all HL-series transmitters of same frequency
- 917MHz Frequency
- Wide voltage range, 10~24 VAC or 9~48 VDC, for more applicationsÂ
- Over 2.028x1031 (20.28 nonillion) possible codes to thwart code crackers and potential for duplicate codes
- PCB antenna – no external antenna to be installed, adjusted, vandalized, or damaged
- Five individually programmable output modes
- Up to 99 button codes per channel
- Available with 1 or 2 channels to control 1 or 2 devicesÂ
- Programming by switch, no need to cut jumpers
- LED Indicates RF reception and programming functions
- RF Signal strength / site survey test mode to find optimal installation location
- Compatible with all HL-series transmitters of same frequency
| Operating frequency | 917MHz |
| Memory capacity | 99 transmitter button codes per channel |
| Operating voltage | 10~24 VAC, 9~48 VDC |
| Operating current - Standby | 8mA@12VDCÂ /Â 5mA@24VDCÂ /Â 2mA@48VDCÂ (typical) |
| Operating current - Active | 100mA@12VDCÂ /Â 50mA@24VDCÂ /Â 25mA@48VDCÂ per channel |
| Relay output - Type | Independent, sequence, access control |
| Relay output - Modes | 1~99 sec momentary (default, 1s), 1~99 min momentary, toggle, latch, follow (validity) |
| Relay contacts - Number | 2 |
| Relay contacts - Rating | Form CÂ 10A@14VDC |
| Digital display | 2-Digit, 7-segment LED |
| Connectors | Screw terminals, +, -, with NO/NC/COM per relay |
| Operating temperature | -40°~167° F (-40°~75° C) |
| Dimensions | 3-15/16"x2-1/2"x1-3/16" (100x63x30 mm) |
Reviews
Related Products
Check items to add to the cart or
