Receivers
-
Seco-Larm HL-951R2-SQ 900MHz RF 2-Channel Receiver
The ENFORCER 900MHz HL-series RF transmitters and receivers use digital modulation for improved immunity to interference, better signal penetration in environments with heavy obstructions, and a significantly longer range of up to 1,800ft (550m)* line of sight. The transmitter's ultra-low power consumption gives you longer battery life with easy to obtain coin-type batteries (CR-2032)
- 917MHz Frequency
- Wide voltage range, 10~24 VAC or 9~48 VDC, for more applicationsÂ
- Over 2.028x1031 (20.28 nonillion) possible codes to thwart code crackers and potential for duplicate codes
- PCB antenna – no external antenna to be installed, adjusted, vandalized, or damaged
- Five individually programmable output modes
- Up to 99 button codes per channel
- Available with 1 or 2 channels to control 1 or 2 devicesÂ
- Programming by switch, no need to cut jumpers
- LED Indicates RF reception and programming functions
- RF Signal strength / site survey test mode to find optimal installation location
- Compatible with all HL-series transmitters of same frequency
secolarm:hl951r2sq -
Seco-Larm HL-951R1-SQ 900MHz 1-Channel RF Receiver
The ENFORCER 900MHz HL-series RF transmitters and receivers use digital modulation for improved immunity to interference, better signal penetration in environments with heavy obstructions, and significantly longer range of up to 1,800ft (550m)* line of sight. The transmitter's ultra-low power consumption gives you longer battery life with easy to obtain coin-type batteries (CR-2032)
- 917MHz Frequency
- Wide voltage range, 10~24 VAC or 9~48 VDC, for more applicationsÂ
- Over 2.028x1031 (20.28 nonillion) possible codes to thwart code crackers and potential for duplicate codes
- PCB antenna – no external antenna to be installed, adjusted, vandalized, or damaged
- Five individually programmable output modes
- Up to 99 button codes per channel
- Available with 1 or 2 channels to control 1 or 2 devicesÂ
- Programming by switch, no need to cut jumpers
- LED Indicates RF reception and programming functions
- RF Signal strength / site survey test mode to find optimal installation location
- Compatible with all HL-series transmitters of same frequency
secolarm:hl951r1sq