WI-AP-M023 Elevator Wireless Bridge Kit
Out of stock
SKU
cctv:wiapm023
This equipment is applicable for elevator monitoring, which installs at both top of the elevator and the compartment, without debugging, easy installation, anti-interference, three Ethernet interface and flexible power supply make it high stability 4K video transmission in 984ft(300m) height.
This equipment is applicable for elevator monitoring, which installs at both top of the elevator and the compartment, without debugging, easy installation, anti-interference, three Ethernet interface and flexible power supply make it high stability 4K video transmission in 984ft(300m) height.
SPECIFICATIONS
| Wireless standards | IEEE802.11b/g/n (2T2R 300Mbps) |
| Working Frequency | 2400~2500MHz |
| Wireless Chip | QCA9531 |
| Output power | 20dBm |
| Sensitivity | −75dBm@MCS7, −100dBm@1Mbps |
| Size of RAM | 64MB |
| Flash | 8MB |
| Connection | 3 × 10/100M Base-TX (CAT5/5E, RJ45) Ethernet Interface |
| Maximum rate | 11n: 300Mbps |
| Antenna | 8dBi |
| Working voltage | 12V DC |
| Working temperature | −30°C + 65°C |
| Storage temperature | −40°C + 85°C |
| Working humidity | 5% ~ 95% RH Noncodensing |
| Dimension | 130 × 130 × 36mm |
| Wireless AP | |
|---|---|
| Wireless | AP |
| SSID | Last 6 numbers of MAC device |
| Network mode | Bridge mode |
| IP Address | Dynamic acquistion by DHCP (192.168.1.88 by default) |
| Wireless CPE | |
| Wireless | Wireless client |
| SSID | Match the SSID of transmit |
| Network mode | Bridge mode |
| IP Address | Dynamic acquistion by DHCP (192.168.1.89 by default) |
| Insurance Price Type | Fixed |
|---|