Seco-Larm SD-9463-KSVQ Outdoor Double-Gang Wave-to-Open Sensor

The ENFORCER Outdoor Double-Gang Wave-to-Open Sensor with Manual Override is a full-featured exit plate using IR technology to allow egress from a protected area or activate a device with a simple wave of a hand. Since no touch is required, it is suitable for use in hospitals, clinics, labs, cleanrooms, schools, factories, or offices. The manual override button allows operation during a power failure.

• ETL, Conforms to UL Std. 294
• Clean and simple no-touch operation reduces the risk of cross-contamination
• Adjustable sensor range up to 7″ (18cm)
• Weatherproof (IP65) for outdoor use†
• 1.2A Relay, adjustable duration 0.8~30 seconds or toggle
• Manual override button functions during a power failure
• LED-illuminated sensor area for easy identification
• Selectable LED colors (turns from red to green or green to red) on sensor activation
• Stainless steel plate

• Type	“Wave-to-Open” Request-to-Exit Plates with Adjustable Delay Timer, for Outdoor Use
  Current Draw	Standby- 16mA@12VDC / 25mA@24VDC, Triggered- 25mA@12VDC / 32mA@24VDC
  Sensing Range	2″~7″ (5~18cm)
  Operating Voltage	12~24 VDC
  Reaction time	10mS
  LEDs – Red	Standby (Colors are reversible.)
  LEDs – Green	Triggered (Colors are reversible.)
  Relay Type	Form C dry contact 1A@30VDC
  Output Time	0.5~30 s, toggle
  Switching Capacity	1.2A@24VDC
  Operating Temperature	-4°~131° F (-20°~55° C)
  Dimensions	5-1/2″ x 4-1/2″ x 1-1/2″ (140 x 114 x 39 mm)
  Weight	5.6-oz (160g)
  IP Rating	Weatherproof IP65