Seco-Larm SD-9163-KS1Q Outdoor Wave-to-Open Sensor

The ENFORCER Outdoor Wave-to-Open Sensor is a full-featured exit plate which uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

• ETL, Conforms to UL Std. 294
• Adjustable sensor range up to 7″ (18cm)
• 1.2A relay, adjustable trigger duration 0.5~30 seconds or toggle
• LED illuminated sensors are for easy identification
• Selectable LED colors turn from red to green (or green to red) when the sensor is activated
• Stainless steel plate
• IP65 Weather-resistant for outdoor use
• Power must be provided by low-voltage power-limited/Class 2 power supply
• Use only low-voltage field wiring and do not exceed 98.5 ft (30m) activated

• Operating temperature	12~24 VDC
  Current draw (max. ±10%)	Standby red (12/24 VDC): 13mA / 15mA Triggered green (12/24 VDC): 21mA / 25mA Standby green (12/24 VDC): 12mA / 14mA Triggered red (12/24 VDC): 23mA / 28mA
  Relay type	SPDT dry contact, 1.2A@24VDC
  Response time	10ms
  LED	Standby: Red* Triggered: Green*
  Output duration	0.5~30 s, toggle
  Range	2″~7″ (5~18 cm)
  Destructive attack level	Level I
  Line security	Level I
  Endurance level	Level IV
  Standby power	Level I
  IP Rating	Weatherproof, IP65
  Operating Temperature	-4°~131° F (-20°~55° C)
  Dimensions	1-1/2″ x4-1/2″(39 x115 mm)
  Weight	2.2-oz (61g)