Seco-Larm MVE-AH1E1-42UQ HDMI Extender

The ENFORCER HDMI Extender with KVM allow you to transmit HDMI audio and video as well as a USB (2.0) signal up to 230ft (70m) over a single Cat6 cable using an active transmitter and receiver, allowing remote operation of a device such as a computer or NVR/DVR. The extenders also provide HDMI loop-out and KVM.

• Display up to 4K@60Hz
• Zero latency transmission up to 230ft (70m) over single Cat6/7
• Supports USB keyboard and mouse (KVM)
• Supports point to point connections
• Transmitter includes HDMI loop-out
• Lightning Protection, surge protection, and ESD protection.
• Receiver has an optical S/PDIF out if an AVR or sound bar is fitted in the remote location

• Input video signal	3.3V
  Input DDC signal	5Vp-p (TTL)
  Maximum signal link range	230ft (70m)
  Video formats supported	High-speed HDMI, HDCP 2.2
  Audio formats supported	LPCM, DTS HD, DTS Audio, Dolby Digital 5.1CH
  Output Video	HDMI
  Resolutions supported	4K@60Hz, 4K@30Hz, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i, 1680×1050, 1680×1050, 1600×900, 1366×768, 1360×768, 1280×960, 1280×800, 1280×720, 1024×768, 800×600
  Range (Cat6/6A/7)	Up to 230ft (70m)
  Video input connector	HDMI Type A 19-pin female
  Maximum input cable length	26ft (8m) AWG24
  Video output connector	HDMI Type A 19-pin female
  Maximum output cable length	26ft (8m) AWG24
  Cat6 Wiring standard	T-568B
  Operating voltage	5~12 VDC
  Power supply	5VDC@2A
  ESD Protection	±8kV (air-gap discharge), ±4kV (contact discharge)
  Current Draw	Transmitter & Receiver: <4W
  Operating humidity	0~90%
  Operating temperature	-4°~140° F (-20°~60° C)
  Dimensions	5-13/16″x4-1/2″x1″ (148x105x25 mm)
  Weight	9.2-oz (260g)