PL-T130K1 VDV MapMaster 3.0 Cable Tester Kit

Overview

The VDV MapMaster™ 3.0 is designed to test and measure lengths of all common low voltage cabling found in today’s network, video or telephone systems. It also maps the locations of cable ends by sending a tone on the cable that can be traced with a tone tracer or by blinking the LED on the port jack. The VDV MapMaster™ 3.0 has a large, bright back- lit LCD display and glow-in-the-dark buttons to directly access each function. The remote stores inside the main unit for ease of cable testing. The VDV MapMaster™ 3.0 is turned on by pressing the power button and begins operating in the last mode used or the selected mode: twisted pair (DATA), coax (VIDEO), telephone (VOICE), tone generation (TONE) or Port Link-Blink (LINC).

FEATURES

Cable Verification •Test, Measure, and Map data, coaxial video and voice cables •Fault testing for opens, shorts, mis-wires, reverses and split pairs •Highly accurate length, opens and split detection using capacitive technology •Port Link-Blink to visually identify connected ports on a switch or router •Verify end-to-end grounding of shielded data cables •Single-ended testing for shorts •Wiremap testing to EIA T568A/B standards and cross- over cables •Loop mode for continuous testing •Recognizes up to 20 unique remote ID numbers for mapping cables •Built-in 4-cadence Tone Generator for audible tracing of cable runs •Auto-off and low power consumption for extended battery life Conveniences •Built-in LED Flashlight •Easy-to-read Large Backlit LCD Display •Glow-in-the-Dark Buttons •Audible Beep for Additional Feedback •Ergonomic Slip-resistant Side Grips •Self-stored Master Remote – Squeeze remote at finger grip openings in main unit to remove •RJ45, RJ12 and F-Jack on Main Unit and Remote

SPECIFICATIONS