Gate Wheels

The V-Groove Wheel with Carriage Plates helps an 11/2" gate utilize roller bearings. Made of durable steel and coated with zinc, this wheel with carriage will elevate your driveway, commercial, or security gate. This set of wheels includes carriage plates.

Key Specifications:

• Color: Zinc
• Material of Gate: Steel or Ornamental Iron
• For Use with Gate Size: 6' x 8'

This 6" HardCORE V-Groove Wheel with Carriage Plates Set by D&D Technologies Inc. SHUT IT includes a 6" HardCore V-Groove Wheel and a pair of 6" HardCORE Carriage Plates, both made of steel with zinc plating. This set is designed for use with 1 1/2" gate frames and bottom rails.

This 6" HardCORE V-Groove Wheel by D&D Technologies Inc. SHUT IT is ideal for use on already existing 6" wheel boxes for retrofit or repair.

• Steel construction makes it sturdy and durable enough to withstand daily wear and tear
• Features two sealed bearings for providing low friction and accurate performance under fluctuating loads and speeds
• Thick wheel size helps minimalize friction and debris issues, ensuring a smooth performance

This 4" HardCORE V-Groove Wheel with Carriage Plates Set by D&D Technologies Inc. SHUT IT includes a 4" HardCore V-Groove Wheel and a pair of 4" HardCORE Carriage Plates, both made of steel with zinc plating. This set is designed for use with 2" gate frames and bottom rails.

Designed for gates with a bottom rail
• Models for different bottom rail widths1½ - 2" (38 & 51mm)
• Two maintenance-free sealed bearings (no greasing)
• Only1⅛" (29mm) wide to reduce friction and debris issues
• Super-hard cold rolled steel (30RC rating)
• Adjustable plates for perfect installations
• Load rating per gate: 3,000 lb (1,360kg)
• Max gate weight: 1,500 lb (680kg)

This 4" HardCORE V-Groove Wheel with Carriage Plates Set by D&D Technologies SHUT IT Gate Hardware includes a 4" HardCore V-Groove Wheel and a pair of 4" HardCORE Carriage Plates, both made of steel with zinc plating. This set is designed for use with 1 1/2" gate frames and bottom rails. It is produced using a unique bushing design that fully utilizes the roller bearings to bring you near frictionless movement without ever having to worry about maintenance. For use on a round bottom rail, you will need to additionally purchase a Carriage Cap.

Features:

• Wheel Material: Steel, Zinc Plated Finish
• Carriage Plate Material: Steel, Zinc Plated Finish
• Two Sealed Maintenance-Free Bearings (no greasing)
• Adjustable Plates For Perfect Installations
• 1 1/8" Thick To Minimalize-Friction and Debris Issues
• Maximum Gate Load: 3000 lbs
• Maximum Gate Weight: 1500 lbs
• Weld-On Installation
• Minimum 1045 Cold Rolled Steel (30RC Rating)
• Limited Lifetime Warranty (5 Years on Bearings)
• UL325 Compatible Installation

Exclusively for use on gates with an 11/2" bottom rail, the SHUT-IT V-Groove Wheel has a unique bushing design to use the roller bearings.

Does not include a carriage plate.

Key Specifications:

• Color: Zinc
• For Use with Gates Made From Aluminum or Ornamental Iron
• Approximate Gate Size: 6'x 8'

The 6" HardCORE Cantilever Wheel Assembly by D&D Technologies Inc. SHUT IT features an all-steel design with zinc plated finish. It allows a wheel to be installed on a rail rather than on a v-track on the ground surface.

Installed on a rail rather than on a v-track
• Ideal when installing a track on the ground is not feasible
• Adjustable plates for perfect installations
• Only 1 1/8" (29mm) wide to reduce friction and debris
• Super-hard cold rolled steel (30RC rating)
• Load rating per gate: 3,000 lb (1,360kg)
• Maximum gate weight: 1,500 lb (680kg)

The 4" HardCORE Cantilever Wheel Assembly by D&D Technologies Inc. SHUT IT features an all-steel design with zinc plated finish. It allows a wheel to be installed on a rail rather than on a v-track on the ground surface.

Installed on a rail rather than on a v-track
• Ideal when installing a track on the ground is not feasible
• Adjustable plates for perfect installations
• Narrow width reduces friction and debris
• Super-hard cold rolled steel (30RC rating)
• Load rating per gate: 3,000 lb (1,360kg)
• Maximum gate weight: 1,500 lb (680kg)

The 6" HardCORE Carriage Plate Set by D&D Technologies SHUT IT Gate Hardware is an all Steel set that is made to replace traditional wheel boxes and enable you to install your HardCore Gate Wheel inside the bottom of the gate itself.

Features:

• Carriage Plate Material: Steel
• Fixing Method: Weld-On
• Five Year Warranty

The 6" HardCORE Carriage Plate Set by D&D Technologies Inc. SHUT IT is an all Steel set that is made to replace traditional wheel boxes and enable you to install your HardCore Gate Wheel inside the bottom of the gate itself.

Features:

• Carriage Plate Material: Steel
• Fixing Method: Weld-On
• Five Year Warranty

The 4" HardCORE Carriage Plate Set by D&D Technologies Inc. SHUT IT is an all-Aluminum set that is made to replace traditional wheel boxes and enable you to install your HardCore Gate Wheel inside the bottom of the gate itself.

Features:

• Carriage Plate Material: Aluminum
• Fixing Method: Weld-On
• Five Year Warranty

The 4" HardCORE Carriage Plate Set by D&D Technologies Inc. SHUT IT is an all Steel set that is made to replace traditional wheel boxes and enable you to install your HardCore Gate Wheel inside the bottom of the gate itself.

Features:

• Carriage Plate Material: Steel
• Fixing Method: Weld-On
• Five Year Warranty

D&D SHUT IT 6" HardCORE V-Groove Wheel with sealed bearings with carriage plates set for 2" gate frame, both made of steel with Zinc plating, designed for use with 2" gate frames and bottom rails. Near frictionless movement. DOES NOT INCLUDE CARRIAGE CAP.

D&D SHUT IT 6" Hardcore V-Groove Wheel w/Sealed bearings, Zinc-plated finish designed for use on gates with a bottom rail, near frictionless movement. CARRIAGE CAP and PLATES ARE NOT INCLUDED.

D&D SHUT IT 4" Hardcore V-Groove Wheel (2" gate frame), all Steel V-Groove Wheel w/Zinc Plated finish that's designed to be used with 2" gate frames and bottom rails, near frictionless movement. Carriage Cap and Plates ARE NOT INCLUDED.

SHUT IT 4" V-Groove Wheel is an all Steel wheel with Zinc plated finish designed to be used with 1 1/2" gate frames and bottom rails. It has a unique bushing design that fully utilizes the roller bearings, near frictionless movement.  This wheel does not include carriage plates.