DKS DoorKing 6050-380 1/2 Hp Swing Gate Operator

Maximum gate width 10 feet

Maximum gate weight 400 pounds (Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator)

Swings gate 90 degrees in approximately 10 seconds

1/2 HP limited-duty motor. 115 VAC, 4.3 Amps

Class I applications, compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.

Dimensions (operator only): 13.25"W x 12"H* x 23"D (* Height of operator only. Actual height above ground is determined by which mounting method is used)

Warranty: 5 years.

• Self-adjusting, no maintenance magnetic limits.
• Overlap feature for dual swing gate operation.
• Designed with a built-in primary and secondary entrapment prevention system.
• Ports for plug-in loop detectors.
• Fail-safe release.
• Tamper detect circuit.
• Gate tracker reporting output.
• Programming switches.
• Built-in reset switch.
• Built-in power On/Off switch.

  OPTIONS

  • Bi-parting gate connection cable (6050 secondary operator is shipped with 30-feet of cable; 6100 secondary operator is shipped with 40-feet of cable.)
  • Post or pad mount – specify which.
  • Plug-in loop detectors.
  • Heater kit for cold environments.
  • Surge suppressors.