Seco-Larm DP-266-1C7Q Wireless Video Door Phone
The ENFORCER Wireless Video Door Phone is a stand‑alone, handheld home entry solution. Observe visitors on the large 7" screen as they arrive, communicate with them, take photos for later viewing, and unlock a gate to grant entry – all from the wireless monitor. Connect up to 3 monitors with 2 cameras for viewing multiple entrances around the house.
The ENFORCER Wireless Video Door Phone is a stand‑alone, handheld home entry solution. Observe visitors on the large 7" screen as they arrive, communicate with them, take photos for later viewing, and unlock a gate to grant entry – all from the wireless monitor. Connect up to 3 monitors with 2 cameras for viewing multiple entrances around the house.
Features:
- Talk with visitors and unlock doors or gates via the monitor
- Handheld monitor's rechargeable battery allows convenient communication with visitors while moving around the premises
- Connect up to 2 additional monitors and 1 additional camera (sold separately)
- Intercom calling between paired monitors
- Egress input allows the door phone to be connected to a Request‑to‑Exit Plate or other egress device
- Camera has a 170° field of view with adjustable pan and tilt angle to accommodate a variety of installations
- Camera has built-in IR LEDs for nighttime operation
- Camera's built-in PIR sensor activates camera to take photos of approaching visitors
- Tamper switch triggers alarm if camera is removed from base
Type | Color camera |
Chip | CMOS |
Resolution | 480 TV Lines |
Lens | 2mm |
Viewing Angle | Up to 20° any direction |
Operating Voltage | 9~16 VAC / 5~16 VDC |
Relock Delay | 3/6/8 Seconds |
Relay Output | 3A@24VAC/24VDC |
Current Draw | Active 300mA@12VDC Standby 15mA@12VDC |
Battery Life | Active ~7 Hours Standby ~60 Days |
Operating Temperature | 14°~122° F (-10°~50° C) |