Photo Eyes

UNIVERSAL UL325 RETROREFLECTIVE PHOTOEYE KIT

• Kit includes photoeye with hood, reflector with hood, and mounting bracket
• Retroreflective configuration
• UL325-2018 compliant
• Six (6) monitoring interfaces
• 60 ft. operating range
• Easy installation and set-up
• Compatible with many operators

• Thru beam configuration
• Wide sensing angle for increased reliability
• 115 ft. operating range
• NEMA 4X enclosure
• Designed to operate in areas with explosive environments
• NEC Class I, Groups B, C & D, Class II, Groups E, F & G CSA certified, CENELEC certified, EExd IIC
• Copper free aluminum with epoxy finish
• Potentiometer range adjustment to allow for more precise tuning to site
• Thru beam design is not affected by shiny surfaces
• Modulated infrared to reduce the effect of sunlight, fog, rain, dust and dirt
• No focusing lens

• Detection range: 50 feet
• Detection Angle: +/- 5%
• Power Supply: 12-24 VDC 24 VAC (2-3.6 Volt Lithium Batteries for transmitter optional; included)
• Expected Battery Life: 2 years
• Size: 4.4″ (112mm) x 2.05″ (52mm) x 1.3″ (33mm)

• Kit includes photoeye with hood, reflector with hood, and mounting bracket
• Retroreflective configuration
• 50 ft. operating range
• Sensitivity adjustment
• Wide range operating voltage
• IP66 enclosure

NON-MONITORED

• Molded plastic hood integrated into the sensor housing
  
• Molded in hole in the bottom of the photoeye housing for ½ in. NPT connection
  
• Detachable terminal blocks for easy wiring
  
• Smaller housing
  
• Optional metal hoods in grey or gold are available as separate accessories 
  

NON-MONITORED

The IRB-325 kit includes gray steel hoods photocell is an external entrapment protection.

• Kit includes photo-eye with hood, reflector with hood, and mounting bracket
• Retroreflective configuration
• NC and 10K monitoring
• 50 ft. operating range
• Sensitivity adjustment
• Wide range operating voltage
• IP66 enclosure

10K MONITORED

• Easy to Install and set up with the ULTRAMETER sensitivity display
  
• Fail safe in the event of a loop failure
• Faile secure in the event of power loss
• Compact Design
• Cost Effective
• Energy Efficient

• Range: 30 Feet
• Power: 12V-24V AC or DC
• Relay Contacts: 1A @ 24VDC or 120VAC
• Dimensions: 4in. x 2in. x 1.5in. - 18in. Lead Wire
• Housing: Black PVC - Not water tight

***GREEN PCB (DISCONTINUED) WILL NOT WORK WITH RED PCB***

***RED PCB WILL NOT WORK WITH GREEN PCB (DISCONTINUED)***

• UL325-2018 compliant
• Operating range up to 200 ft. (61 m)
• Operating frequency 915 MHz
• NEMA 4X enclosures

***GREEN PCB (DISCONTINUED) WILL NOT WORK WITH RED PCB***

***RED PCB WILL NOT WORK WITH GREEN PCB (DISCONTINUED)***

• UL325-2018 compliant
• Operating range up to 200 ft. (61 m)
• Operating frequency 915 MHz
• NEMA 4X enclosures

***GREEN PCB (DISCONTINUED) WILL NOT WORK WITH RED PCB***

***RED PCB WILL NOT WORK WITH GREEN PCB (DISCONTINUED)***

• UL325-2018 compliant
• Operating range up to 200 ft. (61 m)
• Operating frequency 915 MHz
• NEMA 4X enclosures

• Remote Control - For easy programming of the OWL Microwave Motion & Infrared Presence Sensor

• Kit includes photo-eye with hood, reflector with hood, and mounting bracket
• Retroreflective configuration
• 30 ft. operating range
• Sensitivity adjustment
• Wide range operating voltage
• IP66 enclosure

NON-MONITORED

• Remote Control - For easy programming of the Raven Microwave Motion Sensor

This detector is easy to install and operate. Sensitivity selection is simplified by the ULTRAMETER

The ULTRA-DIN vehicle loop detector combines small size with full-featured functionality in a DIN rail mount module.