Loop Detectors
-
Diablo Controls AVI-40 10 Pin Plug In Multiple Code Receiver
- Over 19,000 codes to choose from
- Can be programmed to accept up to 4 different codes
- Operates on 8 to 35 volts DC
- Can be field programmable with the “Learn” pushbutton
- No switches to set
- Small profile, perfect for many installations
- Responds to transmitters made by other manufacturers
diablo:avi40 -
Diablo Controls DSP-19 Plug-in, Low Power & Mini-Loop Vehicle Detector
- The DSP-19 is specifically designed to be installed into a LiftMaster® model CSW24 operator or other models that use the same plug-in loop detector.
- The very low current draw and low voltage range is ideal for solar applications.
- Can be connected to a standard inductive loop or one of Diablo Controls free-exit probes.
- Can be used as either a safety loop or free exit loop detector.
- Flexibility to be either “fail-safe” or “fail-secure”.
diablo:dsp19 -
Diablo Controls XLP-8 Extreme Low Power Vehicle Detector
The XLP-8 is specifically designed as a small, simple to use, extremely low current draw, vehicle detector.
The XLP-8 is capable of using an inductive loop or a magnetometer sensor (a.k.a. Mini-Loop or Probe).
The extremely low power use (less than 1 milliamp) makes this detector ideal for solar and battery backed-up applications.
diablo:xlp8 -
Diablo Controls DSP-22-1 Single Channel Loop Detector
Switchless single-channel vehicle detector product designed to work with the DoorKing operators. Matches DKS 9410-10 single channel. DKS is a registered trademark of DoorKing Systems. This micro-sized detector will automatically adjust its sensitivity level when used on different sized loops. The detector loop inductance should be between 20 and 2000 microhenries.diablo:dsp221 -
Diablo Controls DSP-22-2 Dual Channel Loop Detector for DKS Operators
Switchless dual-channel vehicle detector product designed to work with the DoorKing operators. Matches DKS 9409-10 dual-channel detector. DKS is a registered trademark of DoorKing Systems. This micro-sized detector will automatically adjust its sensitivity level when used on different sized loops. The detector loop inductance should be between 20 and 2000 microhenries.diablo:dsp222
My Wish List
Last Added Items
You have no items in your wish list.
