Edge Sensor

GREEN LED WHEN MOTIONING UPWARD

RED LED WHEN MOTIONING DOWNWARD

EDGE MUST BE AT LEAST 2 FEET SHORTER THAN THE OVERALL ARM LENGTH

(5 FOOT) REVERSE EDGE ONLY - ARM & HARDWARE KIT SOLD SEPARATELY

EDGE MUST BE AT LEAST 2 FEET SHORTER THAN THE OVERALL ARM LENGTH

(5 FOOT) REVERSE EDGE ONLY - ARM & HARDWARE KIT SOLD SEPARATELY

EDGE MUST BE AT LEAST 2 FEET SHORTER THAN THE OVERALL ARM LENGTH

(6 FOOT) REVERSE EDGE ONLY - ARM & HARDWARE KIT SOLD SEPARATELY

EDGE MUST BE AT LEAST 2 FEET SHORTER THAN THE OVERALL ARM LENGTH

(9 FOOT) REVERSE EDGE ONLY - ARM & HARDWARE KIT SOLD SEPARATELY

EDGE MUST BE AT LEAST 2 FEET SHORTER THAN THE OVERALL ARM LENGTH

(12 FOOT) REVERSE EDGE ONLY - ARM & HARDWARE KIT SOLD SEPARATELY

GREEN LED WHEN MOTIONING UPWARD

RED LED WHEN MOTIONING DOWNWARD

EDGE MUST BE AT LEAST 2 FEET SHORTER THAN THE OVERALL ARM LENGTH

(6 FOOT) REVERSE EDGE ONLY - ARM & HARDWARE KIT SOLD SEPARATELY

GREEN LED WHEN MOTIONING UPWARD

RED LED WHEN MOTIONING DOWNWARD

EDGE MUST BE AT LEAST 2 FEET SHORTER THAN THE OVERALL ARM LENGTH

(9 FOOT) REVERSE EDGE ONLY - ARM & HARDWARE KIT SOLD SEPARATELY

***GREEN PCB (DISCONTINUED) WILL NOT WORK WITH RED PCB***

***RED PCB WILL NOT WORK WITH GREEN PCB (DISCONTINUED)***

• UL325-2018 compliant
• Operating range up to 200 ft. (61 m)
• Operating frequency 915 MHz
• NEMA 4X enclosures

***GREEN PCB (DISCONTINUED) WILL NOT WORK WITH RED PCB***

***RED PCB WILL NOT WORK WITH GREEN PCB (DISCONTINUED)***

• UL325-2018 compliant
• Operating range up to 200 ft. (61 m)
• Operating frequency 915 MHz
• NEMA 4X enclosures

***GREEN PCB (DISCONTINUED) WILL NOT WORK WITH RED PCB***

***RED PCB WILL NOT WORK WITH GREEN PCB (DISCONTINUED)***

• UL325-2018 compliant
• Operating range up to 200 ft. (61 m)
• Operating frequency 915 MHz
• NEMA 4X enclosures

Traditional profile rubber edge is available in Normally Open option or compliant with UL 325 monitored 8.2K or 10K Resistive options. Designed out of a tough thermoplastic rubber, this edge will provide years of service. Mounts to gate with an aluminum channel. 3'

Traditional profile rubber edge is available in Normally Open option or compliant with UL 325 monitored 8.2K or 10K Resistive options. Designed out of a tough thermoplastic rubber, this edge will provide years of service. Mounts to gate with an aluminum channel. 4'

This transmitter is for adding to the receiver kit or for replacement of a damaged unit.

FEATURES:

Functions with mechanical & resistive edges simultaneously

65 feet of range between receiver & transmitter

2 Relay outputs

Battery powered transmitter with up to 5 years battery life

GREEN LED WHEN MOTIONING UPWARD

RED LED WHEN MOTIONING DOWNWARD

EDGE MUST BE AT LEAST 2 FEET SHORTER THAN THE OVERALL ARM LENGTH

(12 FOOT) REVERSE EDGE ONLY - ARM & HARDWARE KIT SOLD SEPARATELY

Two-wire Non-Monitored Unit

Color: Black
Length: Per specification to nearest 1/4”
Max. Length: Up to 10 feet.
Lead Wire: SJTO, 18 gauge, 2ft. length
Sensitivity ME120: nominal 8-13 lbf MGO20 nominal 4-7 lbf
Electrical Diagram: 2 wire N.O. configuration
Electrical Maximum: 24 volt AC or DC,1/2 amp
Mechanical Diagram: See drawings on reverse side
Contact Element: Alumaglas Materials: Flexible PVC
Channel: Extruded PVC or Aluminum
Temperature Range: -30oF to +155oF
Wire Outlet Location: Right side, Left side or end

1 Year Warranty

Designed for use on a 2" square post. 5 foot tall. No mounting channel is required. 10K resistive monitoring, 2 wire universal output, and universal left/right mounting.