Safety Devices
Gate safety devices are safety mechanisms designed to prevent accidents and injuries involving gates. Some common gate safety devices include:
1. Gate sensors: These devices use infrared or motion detection technology to sense when an object or person is in the path of the gate, causing it to stop or reverse direction to prevent crushing injuries.
2. Gate edge sensors: These sensors are installed along the edges of the gate and detect any obstructions, triggering the gate to stop and reverse if necessary.
3. Photoelectric beams: These beams create an invisible barrier across the gate opening, and if broken by an object or person, will stop the gate from closing until the obstruction is removed.
4. Safety loops: These are embedded in the ground near the gate and sense the presence of vehicles or obstacles, causing the gate to remain open until the area is clear.
5. Emergency stop buttons: These manual controls allow users to instantly stop the gates movement in case of an emergency or when an obstruction is detected.
By incorporating these gate safety devices, property owners can help prevent accidents and injuries while ensuring the safe operation of their gates.
-
BEA 10MATRIXIIS1224 Single loop Detector, 12-24VAC/VDC
BEA’s MATRIX FAMILY of induction loop detectors is designed for vehicle detection application in industrial environments.
These UL 508 listed loop detectors offer a wide range of features including automatic boost sensitivity (ABS), pulse on entry and pulse on exit. The MATRIX 3 provides learn on power up, as well as an independent dual loop detection setting.
The MATRIX FAMILY includes single and dual loop detectors with operating voltages of 110 – 120 VAC or 12 – 24 VAC / VDC, depending on model.
bea:10matrixiis1224 -
BEA 10MATRIXIIS110 Single Loop Detector, 110-120VAC
BEA’s MATRIX FAMILY of induction loop detectors is designed for vehicle detection application in industrial environments.
These UL 508 listed loop detectors offer a wide range of features including automatic boost sensitivity (ABS), pulse on entry and pulse on exit. The MATRIX 3 provides learn on power up, as well as an independent dual loop detection setting.
The MATRIX FAMILY includes single and dual loop detectors with operating voltages of 110 – 120 VAC or 12 – 24 VAC / VDC, depending on model.
bea:10matrixiis110 -
BEA 10MATRIXD1224 Dual Loop Detector, 12-24VAC/VDC
BEA’s MATRIX FAMILY of induction loop detectors is designed for vehicle detection application in industrial environments.
These UL 508 listed loop detectors offer a wide range of features including automatic boost sensitivity (ABS), pulse on entry and pulse on exit. The MATRIX 3 provides learn on power up, as well as an independent dual loop detection setting.
The MATRIX FAMILY includes single and dual loop detectors with operating voltages of 110 – 120 VAC or 12 – 24 VAC / VDC, depending on model.
bea:10matrixd1224 -
BEA 10MATRIXD110 Dual Loop Detector, 110-120VAC
BEA’s MATRIX FAMILY of induction loop detectors is designed for vehicle detection application in industrial environments.
These UL 508 listed loop detectors offer a wide range of features including automatic boost sensitivity (ABS), pulse on entry and pulse on exit. The MATRIX 3 provides learn on power up, as well as an independent dual loop detection setting.
The MATRIX FAMILY includes single and dual loop detectors with operating voltages of 110 – 120 VAC or 12 – 24 VAC / VDC, depending on model.
bea:10matrixd110 -
BEA 10LZRH100 Laser Scanner for Gate & Barrier Applications
BEA’s LZR®-H100 is a LASER-based Time-of-Flight sensor designed for gate and barrier applications.
This solution provides four LASER-based curtains, offering a three dimensional detection zone for accurate object detection. Its detection curtains are highly-configurable and can be set up for activation and presence detection in vehicle sensing applications.
The LZR-H100 is an effective alternative to induction loops and is housed in an IP65 rated enclosure, further ensuring its performance in outdoor environments.
bea:10lzrh100 -
BEA 10SSTSECONDARY SuperScan Sensor, Secondary
BEA’s SUPERSCAN-T is a door mounted, active infrared safety sensor designed for use on automatic swinging, revolving, folding and low energy doors.
The SUPERSCAN-T uses triangulation to detect the presence of a pedestrian, while the door is opening and closing.
The SUPERSCAN-T can be used as an individual module or daisy chained with additional secondary modules. This flexibility allows the SUPERSCAN-T to be used on both narrow and wide doors. Each module detection zone can be adjusted independently.
bea:10sstsecondary -
BEA 10SSTPRIMARY SuperScan Sensor, Primary
BEA’s SUPERSCAN-T is a door mounted, active infrared safety sensor designed for use on automatic swinging, revolving, folding and low energy doors.
The SUPERSCAN-T uses triangulation to detect the presence of a pedestrian, while the door is opening and closing.
The SUPERSCAN-T can be used as an individual module or daisy chained with additional secondary modules. This flexibility allows the SUPERSCAN-T to be used on both narrow and wide doors. Each module detection zone can be adjusted independently.
bea:10sstprimary -
BEA 10SSTIII SuperScan III Sensor, 1 Primary & 2 Secondary
BEA’s SUPERSCAN-T is a door mounted, active infrared safety sensor designed for use on automatic swinging, revolving, folding and low energy doors.
The SUPERSCAN-T uses triangulation to detect the presence of a pedestrian, while the door is opening and closing.
The SUPERSCAN-T can be used as an individual module or daisy chained with additional secondary modules. This flexibility allows the SUPERSCAN-T to be used on both narrow and wide doors. Each module detection zone can be adjusted independently.
bea:10sstiii -
BEA 10SSTII48 SuperScan II Sensor, 48" 1 Primary & 1 Secondary
BEA’s SUPERSCAN-T is a door mounted, active infrared safety sensor designed for use on automatic swinging, revolving, folding and low energy doors.
The SUPERSCAN-T uses triangulation to detect the presence of a pedestrian, while the door is opening and closing.
The SUPERSCAN-T can be used as an individual module or daisy chained with additional secondary modules. This flexibility allows the SUPERSCAN-T to be used on both narrow and wide doors. Each module detection zone can be adjusted independently.
bea:10sstii48 -
BEA 10SSTII44 SuperScan II Sensor, 44" 1 Primary & 1 Secondary
BEA’s SUPERSCAN-T is a door mounted, active infrared safety sensor designed for use on automatic swinging, revolving, folding and low energy doors.
The SUPERSCAN-T uses triangulation to detect the presence of a pedestrian, while the door is opening and closing.
The SUPERSCAN-T can be used as an individual module or daisy chained with additional secondary modules. This flexibility allows the SUPERSCAN-T to be used on both narrow and wide doors. Each module detection zone can be adjusted independently.
bea:10sstii44 -
BEA 10SSTII42 SuperScan II Sensor, 42" 1 Primary & 1 Secondary
BEA’s SUPERSCAN-T is a door mounted, active infrared safety sensor designed for use on automatic swinging, revolving, folding and low energy doors.
The SUPERSCAN-T uses triangulation to detect the presence of a pedestrian, while the door is opening and closing.
The SUPERSCAN-T can be used as an individual module or daisy chained with additional secondary modules. This flexibility allows the SUPERSCAN-T to be used on both narrow and wide doors. Each module detection zone can be adjusted independently.
bea:10sstii42 -
BEA 10SSTII40 SuperScan II Sensor, 40" 1 Primary & 1 Secondary
BEA’s SUPERSCAN-T is a door mounted, active infrared safety sensor designed for use on automatic swinging, revolving, folding and low energy doors.
The SUPERSCAN-T uses triangulation to detect the presence of a pedestrian, while the door is opening and closing.
The SUPERSCAN-T can be used as an individual module or daisy chained with additional secondary modules. This flexibility allows the SUPERSCAN-T to be used on both narrow and wide doors. Each module detection zone can be adjusted independently.
bea:10sstii40 -
BEA 10SSTII SuperScan II Sensor, 34.5" 1 Primary & 1 Secondary
BEA’s SUPERSCAN-T is a door mounted, active infrared safety sensor designed for use on automatic swinging, revolving, folding and low energy doors.
The SUPERSCAN-T uses triangulation to detect the presence of a pedestrian, while the door is opening and closing.
The SUPERSCAN-T can be used as an individual module or daisy chained with additional secondary modules. This flexibility allows the SUPERSCAN-T to be used on both narrow and wide doors. Each module detection zone can be adjusted independently.
bea:10sstii -
BEA 10SSTI48 SuperScan I Sensor, 48" 1 Primary
BEA’s SUPERSCAN-T is a door mounted, active infrared safety sensor designed for use on automatic swinging, revolving, folding and low energy doors.
The SUPERSCAN-T uses triangulation to detect the presence of a pedestrian, while the door is opening and closing.
The SUPERSCAN-T can be used as an individual module or daisy chained with additional secondary modules. This flexibility allows the SUPERSCAN-T to be used on both narrow and wide doors. Each module detection zone can be adjusted independently.
bea:10ssti48 -
BEA 10SSTI42 SuperScan I Sensor, 42" 1 Primary
BEA’s SUPERSCAN-T is a door mounted, active infrared safety sensor designed for use on automatic swinging, revolving, folding and low energy doors.
The SUPERSCAN-T uses triangulation to detect the presence of a pedestrian, while the door is opening and closing.
The SUPERSCAN-T can be used as an individual module or daisy chained with additional secondary modules. This flexibility allows the SUPERSCAN-T to be used on both narrow and wide doors. Each module detection zone can be adjusted independently.
bea:10ssti42 -
BEA 10SSTI40 SuperScan I Sensor, 40" 1 Primary
BEA’s SUPERSCAN-T is a door mounted, active infrared safety sensor designed for use on automatic swinging, revolving, folding and low energy doors.
The SUPERSCAN-T uses triangulation to detect the presence of a pedestrian, while the door is opening and closing.
The SUPERSCAN-T can be used as an individual module or daisy chained with additional secondary modules. This flexibility allows the SUPERSCAN-T to be used on both narrow and wide doors. Each module detection zone can be adjusted independently.
bea:10ssti40 -
BEA 10SSTI SuperScan I Sensor, Primary
BEA’s SUPERSCAN-T is a door mounted, active infrared safety sensor designed for use on automatic swinging, revolving, folding and low energy doors.
The SUPERSCAN-T uses triangulation to detect the presence of a pedestrian, while the door is opening and closing.
The SUPERSCAN-T can be used as an individual module or daisy chained with additional secondary modules. This flexibility allows the SUPERSCAN-T to be used on both narrow and wide doors. Each module detection zone can be adjusted independently.
bea:10ssti -
BEA 10SPARROW Variable Mount Motion Sensor
BEA’s SPARROW is a highly flexible motion sensor designed to detect people and vehicles in a variety of industrial, security and pedestrian applications.
The SPARROW’s adjustable microwave antenna can be rotated ±120 degrees to create different sensing fields, capable of detecting bi-directional traffic (two way), unidirectional (approach only) and unidirectional away (departure only).
The SPARROW is designed to operate in industrial or harsh environments. It is ideal for motion detection applications including vehicle sensing, access control and warning indication
bea:10sparrow
My Wish List
Last Added Items
You have no items in your wish list.
