Safety Devices
Gate safety devices are safety mechanisms designed to prevent accidents and injuries involving gates. Some common gate safety devices include:
1. Gate sensors: These devices use infrared or motion detection technology to sense when an object or person is in the path of the gate, causing it to stop or reverse direction to prevent crushing injuries.
2. Gate edge sensors: These sensors are installed along the edges of the gate and detect any obstructions, triggering the gate to stop and reverse if necessary.
3. Photoelectric beams: These beams create an invisible barrier across the gate opening, and if broken by an object or person, will stop the gate from closing until the obstruction is removed.
4. Safety loops: These are embedded in the ground near the gate and sense the presence of vehicles or obstacles, causing the gate to remain open until the area is clear.
5. Emergency stop buttons: These manual controls allow users to instantly stop the gates movement in case of an emergency or when an obstruction is detected.
By incorporating these gate safety devices, property owners can help prevent accidents and injuries while ensuring the safe operation of their gates.
-
-
Seco-Larm E-964-S50TB Multi-Frequency Single Photobeam
Miniature Single Photobeam, range: up to 50ft (15m), 10~24VDC operation, built-in AGC control to filter out lighting disturbances, LED indicators for power/signal strength and alarm, weatherproof for indoor and outdoor use (IP65), 4 selectable frequencies to reduce interference.secolarm:e964s50tb -
Seco-Larm E-936-S45RRGQ Monitored Reflective Photoelectric Sensor, 45 ft.
Now with UL 325-2016 Standard (10K resistive and NC)
E-931-S45RRGQ 45ft Reflective Photoelectric Beam Sensor.
- Range: Up to 45ft.
- 12~250 VAC/VDC.
- 3A Relay output, NO/NC/COM.
- Adjustable response time.
- Includes round reflector, square reflector, mounting brackets and hardware, and reflector hood.
secolarm:e936s45rrgq -
Seco-Larm E-931-S50RRGQ Monitored Reflective Photoelectric Beam Sensor 50ft
Now with UL 325-2016 Standard (10K resistive and NC)
- For outdoor gates, garage doors, etc.
- Weatherproof (IP55) construction for indoor/outdoor use
- Anti-condensation housing
- Dual-color LED alignment system
- Form C relay: 500mA@30VAC/VDC
- Tamper switch: N.C. 500mA@30VAC/VDC
- 31/4” (82mm) Round reflector with hood included
- Compact size
- Monitored output: N.C., 10kΩ Resistor
secolarm:e931s50rrgq
My Wish List
Last Added Items
You have no items in your wish list.
