Safety Devices
Gate safety devices are safety mechanisms designed to prevent accidents and injuries involving gates. Some common gate safety devices include:
1. Gate sensors: These devices use infrared or motion detection technology to sense when an object or person is in the path of the gate, causing it to stop or reverse direction to prevent crushing injuries.
2. Gate edge sensors: These sensors are installed along the edges of the gate and detect any obstructions, triggering the gate to stop and reverse if necessary.
3. Photoelectric beams: These beams create an invisible barrier across the gate opening, and if broken by an object or person, will stop the gate from closing until the obstruction is removed.
4. Safety loops: These are embedded in the ground near the gate and sense the presence of vehicles or obstacles, causing the gate to remain open until the area is clear.
5. Emergency stop buttons: These manual controls allow users to instantly stop the gates movement in case of an emergency or when an obstruction is detected.
By incorporating these gate safety devices, property owners can help prevent accidents and injuries while ensuring the safe operation of their gates.
-
EMX DAK-2ULTMVP Dual-Zone Drive-Thru Alert Kit
- Ready to install, complete system
- Detect vehicles & alert staff
- Includes 2 induction loop sensors, 2 loop detectors, alert strobe/chime
- Pre-wired enclosure with components pre-installed
- Perfect all in one solution for applications requiring dual-zone detection and alert
emx:dak2ultmvp -
EMX IRB-RET2 Retro-Reflective Photoeye
UNIVERSAL UL325 RETROREFLECTIVE PHOTOEYE KIT
- Kit includes photoeye with hood, reflector with hood, and mounting bracket
- Retroreflective configuration
- UL325-2018 compliant
- Six (6) monitoring interfaces
- 60 ft. operating range
- Easy installation and set-up
- Compatible with many operators
emx:irbret2 -
EMX ULT-MVP-2U Two Channel Multi-Voltage Vehicle Detector
- Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
- Fits into small operator housings, saving space
- Easy to install and setup with the ULTRAMETER™ sensitivity display
- Low current draw – green product
- Easy identification of interference problems using the crosstalk and RFI interference display
emx:ultmvp2u -
EMX USVD-4X Ultrasonic Vehicle Detector
- Triangular Planar Array Technology
- Aux. relay, settings for pulse on ENTRY, EXIT or BOTH
- Output delay option for 1, 2 and 4 seconds
- Operating range: 1ft. – 5ft.
- Response time: 2.0 seconds
- Supply Voltage12…24 VDC/VAC
- Relay output configuration: 2 SPDT (form C)
- CE compliant
emx:usvd4x -
EMX IRB-EXP Explosion-Proof Photoeye
- Thru beam configuration
- Wide sensing angle for increased reliability
- 115 ft. operating range
- NEMA 4X enclosure
- Designed to operate in areas with explosive environments
- NEC Class I, Groups B, C & D, Class II, Groups E, F & G CSA certified, CENELEC certified, EExd IIC
- Copper free aluminum with epoxy finish
- Potentiometer range adjustment to allow for more precise tuning to site
- Thru beam design is not affected by shiny surfaces
- Modulated infrared to reduce the effect of sunlight, fog, rain, dust and dirt
- No focusing lens
emx:irbexp -
EMX LRS-C1 Controller for Single LRS Sensor
- Features advanced 3-axis, magnetoresistive sensing technology that responds to changes in the Earth's magnetic field caused by ferrous objects.
- 3 sensing elements provide measurements in the X, Y and Z axes to improve detection sensitivity when used in either above or below ground installations
- Equppied with new DETECT-ON-STOP feature, which allows detection only when a vehicle has come to a complete stop
emx:lrsc1
My Wish List
Last Added Items
You have no items in your wish list.
