Radio Controls
-
Seco-Larm HL-951R2-SQ 900MHz RF 2-Channel Receiver
The ENFORCER 900MHz HL-series RF transmitters and receivers use digital modulation for improved immunity to interference, better signal penetration in environments with heavy obstructions, and a significantly longer range of up to 1,800ft (550m)* line of sight. The transmitter's ultra-low power consumption gives you longer battery life with easy to obtain coin-type batteries (CR-2032)
- 917MHz Frequency
- Wide voltage range, 10~24 VAC or 9~48 VDC, for more applicationsÂ
- Over 2.028x1031 (20.28 nonillion) possible codes to thwart code crackers and potential for duplicate codes
- PCB antenna – no external antenna to be installed, adjusted, vandalized, or damaged
- Five individually programmable output modes
- Up to 99 button codes per channel
- Available with 1 or 2 channels to control 1 or 2 devicesÂ
- Programming by switch, no need to cut jumpers
- LED Indicates RF reception and programming functions
- RF Signal strength / site survey test mode to find optimal installation location
- Compatible with all HL-series transmitters of same frequency
secolarm:hl951r2sq -
Seco-Larm SK-919TDWS-BUQ Pre-Wired, Fixed Code Transmitter
DISCONTINUED ITEM - NO MANUFACTURERÂ WARRANTY
AFFORDABLE OPENERS PROVIDES A 30-DAY WARRANTY
***LIMITED STOCK AVAILABLE***
The SK-919TDWS-BUQ pre-wired transmitter is specifically designed for custom applications that extend the output of request-to-access plates and other devices, such as sensors or alarms via RF. However, the pendant models of SECO-LARM RF transmitters are designed to be easily adapted for many custom uses, such as home control and automation, or robotics, such as motorized duck decoys. The pendant cases are easily removable for direct access, and are not required for the transmitter to function, while providing for convenient and safe shelf storage.- Frequency 315MHz.
- Operates up to 500ft (150m)*
- Over 68 billion (6.8x1010) possible codes
- Sleek new case with flashing LED transmission indicator
- Includes 12VDC alkaline battery
- Wiring:
— 2 wires (6") for N.O. switch input
— 2 wires (6") for 12VDC power input - Compatible with SK-910RBQ, SK-910RB2Q, SK-910R3Q, SK-910R4Q
- Private label available. Contact SECO-LARM for details
*Actual range will vary greatly depending on the installation and operating environment.secolarm:sk919tdwsbuq-discontinued_rack -
Stingray 318LIPW1V Specific Coded Remote (MegaCode compatible)
***MINIMUM ORDER QUANTITY OF 10*** 2-3 Day Lead Time
Transmitter Solutions Stingray 318LIPW1V 1-Button Visor Garage Door Remotes. Compatible with Linear models MCT-1/ MDT-1 and ACT-31B/21B Remote. *** Transmitter Solutions block coded remotes come with FC #001 and will be coded with sequential transmitter numbers if ordered in lots of 10. If not ordered in multiples of 10 then transmitter numbers may not be sequential. Starting transmitter number will be selected randomly unless you call in your request. ***
tms:stingray318lipw1vspec