Radio Controls
-
Seco-Larm HL-951R2-SQ 900MHz RF 2-Channel Receiver
The ENFORCER 900MHz HL-series RF transmitters and receivers use digital modulation for improved immunity to interference, better signal penetration in environments with heavy obstructions, and a significantly longer range of up to 1,800ft (550m)* line of sight. The transmitter's ultra-low power consumption gives you longer battery life with easy to obtain coin-type batteries (CR-2032)
- 917MHz Frequency
- Wide voltage range, 10~24 VAC or 9~48 VDC, for more applications
- Over 2.028x1031 (20.28 nonillion) possible codes to thwart code crackers and potential for duplicate codes
- PCB antenna – no external antenna to be installed, adjusted, vandalized, or damaged
- Five individually programmable output modes
- Up to 99 button codes per channel
- Available with 1 or 2 channels to control 1 or 2 devices
- Programming by switch, no need to cut jumpers
- LED Indicates RF reception and programming functions
- RF Signal strength / site survey test mode to find optimal installation location
- Compatible with all HL-series transmitters of same frequency
secolarm:hl951r2sq -
Seco-Larm SK-919TDWS-BUQ Pre-Wired, Fixed Code Transmitter
DISCONTINUED ITEM - NO MANUFACTURER WARRANTY
AFFORDABLE OPENERS PROVIDES A 30-DAY WARRANTY
***LIMITED STOCK AVAILABLE***
The SK-919TDWS-BUQ pre-wired transmitter is specifically designed for custom applications that extend the output of request-to-access plates and other devices, such as sensors or alarms via RF. However, the pendant models of SECO-LARM RF transmitters are designed to be easily adapted for many custom uses, such as home control and automation, or robotics, such as motorized duck decoys. The pendant cases are easily removable for direct access, and are not required for the transmitter to function, while providing for convenient and safe shelf storage.- Frequency 315MHz.
- Operates up to 500ft (150m)*
- Over 68 billion (6.8x1010) possible codes
- Sleek new case with flashing LED transmission indicator
- Includes 12VDC alkaline battery
- Wiring:
— 2 wires (6") for N.O. switch input
— 2 wires (6") for 12VDC power input - Compatible with SK-910RBQ, SK-910RB2Q, SK-910R3Q, SK-910R4Q
- Private label available. Contact SECO-LARM for details
*Actual range will vary greatly depending on the installation and operating environment.secolarm:sk919tdwsbuq-discontinued_rack -
Seco-Larm SK-919T1-GBWQ Wired Single-Channel RF Transmitter
- Powered by internal battery or external 3~13 VDC output regulated adapter (not included)
- Frequency 315MHz
- Operates up to 500ft (150m)*
- Over 68 billion (6.8x1010) possible codes
- LED transmission indicator
- Includes one 3VDC lithium battery (CR-2032)
- Compact size
- Compatible with all SECO-LARM SK-series receivers of the same frequency
secolarm:sk919t1gbwq -
Seco-Larm HL-951T2-SQ 900MHz 2-Button RF Transmitter
- 917MHz Frequency
- Digital Modulation – Improved immunity to background interference
- Armor-Piercing Technology – Improved penetration of physical obstructions
- Over 2.028x1031 (20.28 nonillion) possible codes to thwart code crackers and potential for duplicate codes
- Pocket-Sized – IP68 Waterproof, up to 10-years battery life
- Available with one or two buttons – for one or two channels
secolarm:hl951t2sq -
Seco-Larm HL-951T1-SQ 900MHz 1-Button RF Transmitter
- 917MHz Frequency
- Digital Modulation – Improved immunity to background interference
- Armor-Piercing Technology – Improved penetration of physical obstructions
- Over 2.028x1031 (20.28 nonillion) possible codes to thwart code crackers and potential for duplicate codes
- Pocket-Sized – IP68 Waterproof, up to 10-years battery life‡
- Available with one or two buttons – for one or two channels
secolarm:hl951t1sq -
Seco-Larm HL-951R1-SQ 900MHz 1-Channel RF Receiver
The ENFORCER 900MHz HL-series RF transmitters and receivers use digital modulation for improved immunity to interference, better signal penetration in environments with heavy obstructions, and significantly longer range of up to 1,800ft (550m)* line of sight. The transmitter's ultra-low power consumption gives you longer battery life with easy to obtain coin-type batteries (CR-2032)
- 917MHz Frequency
- Wide voltage range, 10~24 VAC or 9~48 VDC, for more applications
- Over 2.028x1031 (20.28 nonillion) possible codes to thwart code crackers and potential for duplicate codes
- PCB antenna – no external antenna to be installed, adjusted, vandalized, or damaged
- Five individually programmable output modes
- Up to 99 button codes per channel
- Available with 1 or 2 channels to control 1 or 2 devices
- Programming by switch, no need to cut jumpers
- LED Indicates RF reception and programming functions
- RF Signal strength / site survey test mode to find optimal installation location
- Compatible with all HL-series transmitters of same frequency
secolarm:hl951r1sq -
Seco-Larm SK-919TP2H-NQ 2-Button RF Transmitter 315MHz
2 Buttons, 3 channels Operates up to 500ft (150m)* Extreme durability - rubber buttons eliminate damage caused by electrostatic discharge and help make transmitter water resistant. Gold-plated battery clips and contact points extend the life of the transmitter Magic LED only appears when buttons are pressed 315MHz Operating frequency (433.92MHz. also available by request) Over 68 billion possible codes CODEBUMP™ models also available with 18 quintillion possible codes RF anti-scan protection Includes two 3VDC lithium batteries Compatible with all 315MHz SECO-LARM receivers Visor clip and belt clip included. Belt-clip holster & wall-mount bracket also available (Model SK-9HBC)secolarm:sk919tp2hnq
My Wish List
Last Added Items
You have no items in your wish list.
