Pedestals & Hoods

For use with the IRB-RET, IRB-MON, or the IRB-4X photoeyes. The housing is made from 11-gauge black powder coated steel with a 1/8" steel base plate. Dimensions are 4-1/4" x 4-1/4" for the post and the base plate is 8" x 8".

*Photoeye sold separately.

Black powder coated steel mounting post 2 in x 2 in x 2 ft

This convenient arm allows you to extend your pedestal's reach through bushes, over fences, and past other possible obstructions. The 12-EXT-4 is compatible with 4" tube pedestals - make sure you match the correct extension arm with your pedestal's face plate AND tube size.

Brushed #304 Stainless Steel

"Single Channel-Dual Height" Necks At 72" And 42"

12" Neck Reach

2" Square X .120" Wall Tube

4" X 4" X .120 Face Plates (2)

8" X 8" X .25" Base Plate

INCLUDES:

Cover Plate, Carriage Bolts & Nuts

Black Powder Coated, Dual Channel-Dual Height

Necks at 72" and 42"

12" neck reach

2" x 4" x .120" Rectangular Wall Tube used at the first 48" of the bottom of post

2" square x .120" wall tube used as the remaining channels at the top of post

4" x 4" x .120 face plates (2)

INCLUDES:

Carriage Bolts & Nuts

THIS ITEM IS BUILT TO ORDER

A revolutionary Emergency Wall Station to help pedestrians contact emergency response teams.

• Integrate any intercom or cameras of your choice - let us know your devices and we'll customize the cutouts!
• Flashing light bricks (top)
• Vertical LED light bars (4 sides)
• A bright blue coating to attract attention.
• Rust-free aluminum construction strong enough to withstand category 4 hurricane-force winds.
• Designed for use in Schools, Corporate Campuses, Healthcare Facilities, Government & Municipalities, Transportation Areas, Parks & Trails
• Designed for installation by a single person. (Devices not included)

THIS ITEM IS BUILT TO ORDER & SHIPS VIA FREIGHT

A revolutionary Emergency Call Tower to help pedestrians contact emergency response teams.

• Integrate any intercom or cameras of your choice - let us know your devices and we'll customize the cutouts!
• Flashing light bricks (top)
• Vertical LED light bars (4 sides)
• A bright blue coating to attract attention.
• Rust-free aluminum construction strong enough to withstand category 4 hurricane-force winds.
• Designed for use in Schools, Corporate Campuses, Healthcare Facilities, Government & Municipalities, Transportation Areas, Parks & Trails
• Designed for installation by a single person. (Devices not included)

Low Profile Design Blends Into A Buildings Roof Line, Maintaining Aesthetics. 

Sturdy Materials Including A 1/2" Base Plate And 11-Gauge Tube. 

Withstands Hurricane Force Winds In Excess Of 150Mph.

#304 Stainless Steel With Brushed, #4 Finish.

Easily Serviceable Using A Handle And Removable Hitch Pin To Rotate The Arm Upwards 180°.

Standard 1-1/2" Npt Coupling To Fit A Wide Variety Of Dome Cameras And Housings. 

Arrives Fully Assembled. Easy To Install With Cable Pass Clearance, Removable Access Panel

Black Powder Coated

12" Neck Reach

4" Square X .120" Wall Tube

8" X 8" X .120 Face Plate

12" X 12" X .25" Base Plate

INCLUDES:

Cover Plate, Carriage Bolts & Nuts

A Beautifully Brushed Stainless Steel Bollard For Decorative Entryways, Glass Lobbies, Class A Spaces, And Premium Clients. 

Meant To Mount Card Readers, Door Stations, Cameras, Intercoms, Keypads, Entry/Exit Buttons, Biometric Readers, And Other Access Control Devices.

Most Often Installed For Aesthetics In High-End Applications. 

The Rounded Corners Are Mirror-Polished And Each Flat Surface Is Polished With A 180 Grit #4 Finish. 

The Top Is Tapered For An Architectural Design.

A Beautifully Brushed Stainless Steel Bollard For Decorative Entryways, Glass Lobbies, Class A Spaces, And Premium Clients. 

Meant To Mount Card Readers, Door Stations, Cameras, Intercoms, Keypads, Entry/Exit Buttons, Biometric Readers, And Other Access Control Devices. 

Most Often Installed For Aesthetics In High-End Applications. 

The Rounded Corners Are Mirror-Polished And Each Flat Surface Is Polished With A 180 Grit #4 Finish.

The Top Is Tapered For An Architectural Design.

Brushed #4 (180 Grit) Finish

12" Neck Reach

3" Square X .120" Wall Tube

6" X 6" X .120 Face Plate

8" X 8" X .25" Base Plate

INCLUDES:

Cover Plate, Carriage Bolts & Nuts

Black Powder Coated

Low Profile

Photo Eye Pedestal

60" Tall

3" Square X .120" Wall Tube

Mount In Ground Or Wet Cement

Black Powder Coated

Low Profile

Photo Eye Pedestal

36" Tall

3" Square X .120" Wall Tube

6" X 6" X .25" Base Plate

Pad Mount

Buffer Plate For Hid R90

Square-Style

Black, High Density Polyethelene (Hdpe)

13.0" X 13.0" X 1.0"

INCLUDES:

Center Hole And Countersunk Mounting Holes

Black Powder Coated

"Single Channel--Dual Height" Necks At 72" And 42"

4" Neck Reach

3" Square X .120" Wall Tube

4.75" X 4.75" X .120 Face Plates (2)

8" X 8" X .25" Base Plate

INCLUDES:

Cover Plate, Carriage Bolts & Nuts

Black Polycarbonate

Uniform Texture And Color

3" Deep Back Box

3.5" Overhang At The Top Tapering To 1.75" At The Bottom

Marked Surface For Easily Drilling Holes

Epdm Rubber Seals

Stainless Steel Hinge

Nema 4.X