Gates

6006-381Secondary Swing Gate Actuator Arm

Same as 6006-380, but also includes 50 Ft. of interconnecting cable.

INCLUDES:

• 6006-380 (1) Primary Operator Arm
• 6006-380 (1) Secondary Operator Arm
• 4302-312 (1) Deluxe Control Box
• 1801-009 (2) 3.4Ah Batteries
• 8080-057 (1) Photobeam Reflective DKS 10k
• 8040-080 (1) Receiver MicroPLUS/Clik 318MHz
• 8069-080 (2) Transmitter MicroPLUS 1B 318Mz

INCLUDES:

• 6006-380 (1) Operator Arm - Includes 6 feet of cable
• 4302-312 (1) Deluxe Control Box
• 1801-009 (2) 3.4Ah Batteries
• 8080-057 (1) Photobeam Reflective DKS 10k
• 8040-080 (1) Receiver MicroPLUS/Clik 318MHz
• 8069-080 (2) Transmitter MicroPLUS 1B 318Mz

INCLUDES:

• 6006-380 Primary Operator Arm
• 6006-380 Secondary Operator Arm
• 4302-311 (1) Standard Control Box
• 1801-009 (2) 3.4Ah Batteries
• 8080-057 (1) Photobeam Reflective DKS 10k
• 8040-080 (1) Receiver MicroPLUS/Clik 318MHz
• 8069-080 (2) Transmitter MicroPLUS 1B 318Mz

24VDC, Continuous Duty

Max Gate Weight - 1600lbs / Max Gate Length - 18ft

INCLUDES:

• 6006-380 (1) Operator Arm - Includes 6 feet of cable
• 4302-311 (1) Standard Control Box
• 1801-009 (2) 3.4Ah Batteries
• 8080-057 (1) Photobeam Reflective DKS 10k
• 8040-080 (1) Receiver MicroPLUS/Clik 318MHz
• 8069-080 (2) Transmitter MicroPLUS 1B 318Mz

Continuous Duty, 1HP 115VAC 7.0amp.

Max Gate Weight 800lbs, Max Gate Length 22'

Includes:

(1) Master Operator

(1) Slave Operator

(1) 40' of Gate Connection Cable

**Please choose mount kits below (Required)**

Machine needs a monitored safety device to operate

The 6300 master/slave set up includes a 1/2 Hp motor

700 lbs. max. weight / 18 ft. max. width (per gate) 

Includes:

(1) Master Operator

(1) Slave Operator

(1) 40' of Gate Connection Cable

**Please choose mount kits below (Required)**

(1) MONITORED SAFETY DEVICE REQUIRED

DKS Max Gate Weight 2000lbs*, Max Gate Length 25', Continuous Duty, 1 HP, 115V (9.7A), Pad Mount, Arm Included. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)

Doorking 6524-381 Swing Gate Oper DC Solar.

(1) Monitored Safety Device Required.

Batteries & Solar Panels not included

Doorking 6002-140 Swing Gate Actuator Filter Kit

DKS DoorKing 2600-719 Gearbox Swing Gate 6500 Spline

Doorking 1203-084 Torsion Rod Assembly for Swing Gates

(1) MONITORED SAFETY DEVICE REQUIRED

Operator is 24 Volt DC and includes built-in battery backup, 115/230 VAC Input (switch selectable) or 24 VDC Solar Power Input, 1/2 HP Quadra Drive Heavy-Duty DC Motor.

(1) MONITORED SAFETY DEVICE REQUIRED

DKS Max Gate Weight 2000lbs*, Max Gate Length 25', Continuous Duty, 1 HP, 115V (9.7A), Pad Mount, Arm Included. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)

MONITORED SAFETY DEVICE REQUIRED

1/2 Hp Motor

Max Gate Weight 400 lbs, Max Gate Length 10'

Includes 50' of M/S Cable, No Control Board, Cannot Be Used Alone

Arm/Mount Kit Sold Separately

DKS SWG Secondary Operator Only, Max Gate Weight 700lbs, Max Gate Length 18'. Includes 50' Of M/S Cable, Mount Kit Control Board Sold Separately, Can Not Be Used Alone. Must purchase mount kit separately. Machine needs a monitored safety device to operate.

Monitored Safety Device Required. The DKS 6400 installs in-ground making it virtually invisible and satisfies the most sophisticated automation needs without being detrimental to the original gate design. The 6400 operates on 24 Volt DC power (AC is converted to DC in the control panel).