
Swing
-
DKS DoorKing 6500-385 1 Hp Secondary Swing Gate Operator
(1) MONITORED SAFETY DEVICE REQUIRED
Maximum gate width 18-ft. (1/2 HP) or 22-ft. (1 HP)
Maximum gate weight 700 pounds* (1/2 HP) or 800 pounds* (1 HP) (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
dks:6500385 -
DKS DoorKing 6500-384 1 Hp Swing Gate Operator
(1) MONITORED SAFETY DEVICE REQUIRED
Maximum gate width 18-ft. (1/2 HP) or 22-ft. (1 HP)
Maximum gate weight 700 pounds* (1/2 HP) or 800 pounds* (1 HP) (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
dks:6500384 -
DKS DoorKing 6500-381 1/2 Hp Secondary Swing Gate Operator
(1) MONITORED SAFETY DEVICE REQUIRED
Maximum gate width 18-ft. (1/2 HP) or 22-ft. (1 HP)
Maximum gate weight 700 pounds* (1/2 HP) or 800 pounds* (1 HP) (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
dks:6500381 -
DKS DoorKing 6300-385 1 Hp Secondary Swing Gate Operator
Monitored Safety Device Required. DKS SWG Secondary Operator Only, Max Gate Weight 800lbs, Max Gate Length 22', Continuous Duty, 1HP 115VAC 7.0amp, With 50' Of Interconnect Cable. Must purchase mount kit separately. Can Not Be Used Alone. Machine needs a monitored safety device to operate.
dks:6300385 -
Viking R6 Next Gen R6NX Swing Gate Operator
Viking Access introduces gate operation with no belts, chains or extra coupling mechanisms. The R-6™ swing gate operator is capable of handling gates up to 700 lbs. and 14’ long. The direct drive mechanism in combination with the adaptable algorithms in the control board set a new standard in gate automation. This operator is UL Listed 18TC UL325 and UL991.
MONITORED SAFETY DEVICE REQUIRED
viking:var6nx -
Viking F1 NEXT GEN VA-F1NX Swing Gate Operator
The F-1 Swing Gate Operator, includes the V-Flex control board and a removable power supply box for low voltage wiring. The removable power supply box allows you to run low voltage to the gate operator rather than high voltage which removes the need to trench high voltage wires. This can save the home or business owner thousands in labor and permit costs.
MONITORED SAFETY DEVICE REQUIRED
viking:vaf1nx -
Nice Apollo 1500 Single Swing Gate Operator Kit
- 12VDC, Max Gate Weight 600 lbs, Max Gate Length 16'
- Nice 318N receiver, Control Box 636 and ABF/A antenna Kit included
- Battery/Solar Panel Operated (sold separately)
- 35Ah battery recommended for AC installations (but not included) along with trickle charger (not included)
- 70Ah battery(s) recommended for solar installations (but not included)
apollo:1500