Platinum BLSW2212 DC Swing Gate Operator

Features and Benefits:

1. Continuous duty

2. Maximum gate width: 12 ft

3. Maximum gate weight: 2200 lbs

4. Heavy-duty gearbox size: 80

5. Dynamic Speed Control – No speed variation when gate load changes and power switches between AC and battery.

6. Automatically Learning with Self-Synchronization – Automatically synchronizes gates with different travel times for primary/secondary gate installation.

8. Soft Start and Soft Stop – Minimizes wear and tear on the gate system for increased gate system life usage.

9. High Efficiency, Powerful, and Brushless Motor – Provides a smooth, high torque and maintenance-free operation.

10. Solid State Motor Drivers – Provides a quietness and longer product life cycle.

11. Advanced Maglock Control – Engages the maglock before or after the gate is closed. Maglock works at both gate opening and closing positions.

12. Dual Output Loop Detector Rack – Type “B” relays on the loop detector can be used for additional features.

13. Individual Alarm For Primary/Secondary Installation – Provides an alarm to indicate that the gate has encountered an obstruction of some sort.

14. Motor Brake and Maglock Release by FIRE/KEY input – Enables manual gate operation during an emergency.

15. One Controlled Power Supply Output for Photo Beam Detector – The unit can turn off the PBD when the gate is closed to increase the battery life usage.

16. High Capacity DC Back-Up – Using two 12V, 33Ah batteries that can open and close the gate over 100 cycles on DC backup depending on the model and gate size.

17. Adjustable Leaf Delay – on either leaf from the primary unit in the primary/secondary system.

18. Fail Safe/Secure Capability – Ability to set fail-secure, fail-safe, or open on fail.

19. Heavy Duty Steel Chassis – Corrosion resistant powder coated chassis.

20. BLGOC-2000 control board with built-in input/output LEDs.

21. Electronic reversing sensor has been built into the control board

22. Adjustable timer - operates from 0-60 seconds.

23. Power Surge protection

24. Alarm reset button

25. Motor breaker

26. Loop rack board

27. AC power switch. Selectable 120VAC/220VAC power input source.

28. 110V AC output outlet

29. Weatherproof polyethylene shell cover.

30. Working temperature is between -20°F to +158°F

33. Commercial motor warranty: 8 years

34. Commercial parts warranty: 6 years

35. Idler pulley warranty: 3 years

36. Battery (as the main power source)warranty: 2 year

37. Battery (used as a backup to the main solar panel power source) warranty: 6 months