Gate Hinges

The face mount, self-closing gate hinge offers a full 180º gate opening for an unobstructed passage, with gate gaps as small as 1/2”. Weld-on and bolt-on models available. Horizontally adjustable, ½” to 1” gate gap offers heightened security and a symmetrical balance when installed with small gap latches. No greasing or maintenance required on sealed bearings. EVER!

• Opens to 180° for unobstructed pass through
• Achieve gate gaps as small as 1⁄2“ (13mm)
• Horizontally adjustable 1⁄2“ to 1” for precise installation
• Both weld-on and bolt-on models available
• No greasing or maintenance required on sealed bearings. EVER!
• Horizontal adjustability is ideal for panic bar installations
• Self-closing maximum gate weight: 440 lb (with 2 closers) CI3835FM or CI3825FM
• Self-closing maximum gate weight: 300 lb (with a closer and plain hinge set)
• 5 tension-adjustment settings
• ADA suitable

Made with the same BadAss technology as our BIG hinges, but designed for the lighter side, The Baby BadAss models are the perfect gate hinge for high-end pedestrian gates and low-usage drive entry gates that are welded to steel end posts in the field.

 High-temperature sealed bearings – safe to powder coat with hinges installed on gates
• No greasing or maintenance required on sealed bearings. EVER!
• Horizontal adjustability for perfect installations
• Up to ½" (13mm) of horizontal adjustment
• Ideal for square or round post installations
• Load rating per gate: 500 lb (230kg)
• Maximum gate weight: 300 lb (140kg)

Made with the same BadAss technology as our BIG hinges, but designed for the lighter side, The Baby BadAss models are the perfect gate hinge for high-end pedestrian gates and low-usage drive entry gates that are welded to steel end posts in the field.

 High-temperature sealed bearings – safe to powder coat with hinges installed on gates
• No greasing or maintenance required on sealed bearings. EVER!
• Horizontal adjustability for perfect installations
• Up to ½" (13mm) of horizontal adjustment
• Ideal for square or round post installations
• Load rating per gate: 500 lb (230kg)
• Maximum gate weight: 300 lb (140kg)

Made with the same BadAss technology as our BIG hinges, but designed for the lighter side, The Baby BadAss models are the perfect gate hinge for high-end pedestrian gates and low-usage drive entry gates that are welded to steel end posts in the field.

• High-temperature sealed bearings – safe to powder coat with hinges installed on gates
• No greasing or maintenance required on sealed bearings. EVER!
• Horizontal adjustability for perfect installations
• Up to ½" (13mm) of horizontal adjustment
• Ideal for square or round post installations
• Load rating per gate: 500 lb (230kg)
• Maximum gate weight: 300 lb (140kg)

Made with the same BadAss technology as our BIG hinges, but designed for the lighter side, The Baby BadAss models are the perfect gate hinge for high-end pedestrian gates and low-usage drive entry gates that are welded to steel end posts in the field.

• High-temperature sealed bearings – safe to powder coat with hinges installed on gate
• No greasing or maintenance required on sealed bearings. EVER!
• Horizontal adjustability for perfect installations
• Up to ½" (13mm) of horizontal adjustment
• Ideal for square or round post installations
• Load rating per gate: 500 lb (230kg)
• Maximum gate weight: 300 lb (140kg)

This hinge is the biggest and baddest hinge available on the market for the toughest of situations when you really need a hinge that isn't going to give out, featuring an upgraded yoke and grade 8 bolt (shaft), as well as, not only a Lifetime Warranty but a HUNDRED YEAR WARRANTY! This hinge is not messing around!

 High-temperature sealed bearings – safe to powder coat with hinges installed on gates
• No greasing, no maintenance. EVER!
• Horizontal adjustability for perfect installations
• Load rating per gate: 3,000 lb (1,360kg)
• Maximum gate weight: 1,500 lb (680kg)

The Aluminum BadAss Gate Hinge by D&D Technologies SHUT IT Gate Hardware is an Aluminum Gate Hinge with a Zinc-Plated Finish that is ideal for both flat and round post installations. It is produced by using CNC Machining involving the use of high-tech computer-controlled machines to create a nearly perfect product with the tightest tolerances in the gate hinge industry. On top of that, The Aluminum BadAss Hinge also features a unique bushing design to bring you near frictionless movement without ever having to worry about maintenance. Limited Lifetime Warranty.

This hinge was designed specifically with the understanding that not all installations are exclusively steel or aluminum, with its aluminum body and steel yoke, it is ideal for high-end installations where an aluminum gate is welded to a steel endpost.

• High-temperature sealed bearings – safe to powder coat with hinges installed on gate
• No greasing or maintenance required on sealed bearings. EVER!
• Horizontal adjustability for perfect installations
• Ideal for flat post installation
• Load rating per gate: 1,000 lb (450kg)
• Maximum gate weight: 600 lb (270kg)

The ORIGINAL BadAss gate hinge is CNC machined to the tightest tolerances in the industry. 
Due to SHUT IT’s unique bushing design The ORIGINAL, like all other SHUT IT gate hinges, produces near 
frictionless movement with maintenance-free usage.

Features:

• Body Material: Steel
• Yoke Material: Steel
• Two Sealed Maintenance Free Bearings (no greasing)
• Adjustable Yoke For Perfect Installations
• Ideal For Both Flat and Round Post Installations
• Maximum Gate Load: 2000 lbs
• Maximum Gate Weight: 1100 lbs
• Weld-On Installation
• Limited Lifetime Warranty

The Face Mount Weld-On BadAss Gate Hinge by D&D Technologies SHUT IT Gate Hardware is an all-steel gate hinge with a zinc-plated finish that boasts rust and corrosion resistance. Specifically designed for proper gate movement, this hinge is horizontally adjustable to achieve hassle-free installation. The horizontal adjustment feature allows for a gate gap as little as 1/2" which contributes to higher security as well as a sleek appearance. For a smooth, unobstructed pass-through this face mount opens a full 180 degrees.

Load rating per gate: 2,000 lb (900kg)
Maximum gate weight: 1,000 lb (450kg)

Included in this kit is the D&D LokkLatch Series 2 Adjustable Lockable Residential Gate Latch in Black, along with D&D TruClose Mini Multi-Adjustable Self-Closing Gate Hinges for all gates. This set offers versatility, security, and a sleek black finish. The mini hinges provide compact yet effective self-closing functionality. Ideal for a wide range of gate types and installations.

Kit Includes:
LLAA, TCHD1AL2S3BT

The D&D LokkLatch Series 2 Gate Latch & TruClose Hinge Kit offers a secure, durable, and weather-resistant gate solution for residential and commercial use on wood or vinyl gates. With key-lockable latches and adjustable tension hinges, this kit ensures reliable performance and smooth gate operation in any environment.

Pair the D&D LokkLatch Series 2 Adjustable Lockable latch with TruClose Self-Closing Hinges featuring 2 side legs for metal pool and safety gates, both in white, for a secure and reliable solution.

Kit Includes:

LokkLatch Series 2 Adjustable Lockable Latch: LLAAW

Pair of TruClose Self-Closing, 2 side legs Hinge: TCA1L2S3WT

Fasteners Included

This collection features the D&D MagnaLatch Series 3 Top Pull Safety Gate Latch in Black, specifically designed for pool gates, paired with D&D TruClose Mini Multi-Adjustable Self-Closing Gate Hinges in Black. These hinges offer versatility and compact design, making them suitable for all gate types. This set is perfect for areas requiring both aesthetic appeal and functional reliability. The black finish provides a uniform and sophisticated look for various gate installations.

TruClose hinges are quick and easy to install and adjust for self-closing speed.
Hinges are made from strong engineering polymers and stainless steel components for long-lasting use.
Features ergonomic and child-resistant lift knob for safety
Kit Includes:
ML3TPKA, TCHDMA1

The Bolt-On Baby BadAss Gate Hinge by D&D Technologies Inc. SHUT IT is a Steel Bolt-On Gate Hinge with a Zinc Plated Finish that has a petite design which makes it ideal for use on smaller gate applications where welding the hinges to the gate and end post is not an option, therefore the only option left is to bolt them on.

Designed for gates where welding is not an option
• High-temperature sealed bearings – safe to powder coat with hinges installed on gates
• No greasing or maintenance required on sealed bearings
• Horizontal adjustability for perfect installations
• Flat, bolt-on brackets for through bolting
• Zinc plated
• Load rating per gate: 600 lb (270kg)
• Maximum gate weight: 300 lb (140kg)

The BadAss Strap Hinge by D&D Technologies Inc. SHUT IT is an all Steel Strap Hinge with a Zinc Plated Finish that is ideal for flat post installations. The hinge is a barrel hinge with extended 10" straps, making for the most convenient and flexible applications.

• High-temperature sealed bearings – safe to powder coat with hinges installed on gate
• No greasing or maintenance required on sealed bearings. EVER!
• Horizontal adjustability for perfect installations
• Suitable for motorised, uphill or heavy gates
• For square-posted, weld-on installations
• Zinc electroplated external components
• Swings 180º, fixed gap variance 1/2" (13mm)
• Leaf straps can be cut to length
• Load rating per gate: 3,000 lb (1,360kg)
• Maximum gate weight: 1,500 lb (680kg)

One of SHUT IT Gate Hardware’s newest gate hinges, the BadAss Strap Hinge, is a barrel hinge that includes either a 6" (152mm) or 10” (254mm) strap for convenient and flexible gate installations. The strap hinge is also one of SHUT IT’s strongest gate hinges with more bearing load than any hinge on the market. By combining different lengths, top and bottom, it is the ideal solution for opening gates on an uphill gradient.

The face mount, self-closing gate hinge offers a full 180º gate opening for an unobstructed passage, with gate gaps as small as 1/2”. Weld-on and bolt-on models available. Horizontally adjustable, ½” to 1” gate gap offers heightened security and a symmetrical balance when installed with small gap latches. No greasing or maintenance required on sealed bearings. 

Specifications:

• Gap Variance: 1/2" - 1"
• Gate Frame/Post Shape: Square-to-Square/Square-to-Round
• Material: Steel
• Color/Finish: Zinc
• Gate Material: Steel/Ornamental Iron/Aluminum
• Fixing Method: Bolt-On