Probe & Motion Sensors

• Audible alert
• Volume adjust up to 100 dBA (at 5ft)
• 6 melodies
• 25ft of durable cable
• Additional output relay

• Ready to install, complete system
• Detect vehicles & alert staff
• Includes 2 induction loop sensors, 2 loop detectors, alert strobe/chime
• Pre-wired enclosure with components pre-installed
• Perfect all in one solution for applications requiring dual-zone detection and alert

• Triangular Planar Array Technology
• Aux. relay, settings for pulse on ENTRY, EXIT or BOTH
• Output delay option for 1, 2 and 4 seconds
• Operating range: 1ft. – 5ft.
• Response time: 2.0 seconds
• Supply Voltage12…24 VDC/VAC
• Relay output configuration: 2 SPDT (form C)
• Audible Chime w/ 6 melodies
• Adjustable Volume (up to 100 dBA)
• CE compliant

EMX Carsense Driveway Direct Burial Probe Only!!! Detector Sold Separately (cs101detector)

Socket Base Sold Separately (7122k21)

9 - 41 VDC or 6 - 29 VAC

• Advanced microwave and infrared technology with adjustable detection field
• Distinguish between pedestrian and vehicle traffic for energy efficient door openings
• Adjustable filtering settings with remote control

Advantages:

• Disregard pedestrian and parallel traffic
• Flexible adjustment of the detection field
• Reduce door openings to save energy
• Indoor and outdoor use

• Triangular Planar Array Technology
• Aux. relay, settings for pulse on ENTRY, EXIT or BOTH
• Output delay option for 1, 2 and 4 seconds
• Operating range: 1ft. – 5ft.
• Response time: 2.0 seconds
• Supply Voltage12…24 VDC/VAC
• Relay output configuration: 2 SPDT (form C)
• CE compliant

Remote tuning and adjustment control for the VMD202 Vehicle Motion Detector.

***Must purchase the VMD202-R to be able to adjust the sensitivity of the VMD202*** EMX Carsense driveway sensor, 9V to 35V AC/DC 1 PC probe sensor with 5-wire connection (Can be used in place of the 3-wire version). Click on product to choose lead length.

EMX Carsense Driveway Direct Burial Probe Only!!! Detector Sold Separately (cs101detector)

Socket Base Sold Separately (7122k21)

9 - 41 VDC or 6 - 29 VAC

EMX Carsense Driveway Direct Burial Probe Only!!! Detector Sold Separately (cs101detector)

Socket Base Sold Separately (7122k21)

9 - 41 VDC or 6 - 29 VAC

This is only one part of the two part LRS system. Either the LRS-C1 or the LRS-L controller will work with this sensor.

Not recommended for asphalt installations where temperatures exceed 100 degrees.

This is only one part of the two part LRS system. Either the LRS-C1 or the LRS-L controller will work with this sensor.

Not recommended for asphalt installations where temperatures exceed 100 degrees.

This is only one part of the two part LRS system. Either the LRS-C1 or the LRS-L controller will work with this sensor.

• Features advanced 3-axis, magnetoresistive sensing technology that responds to changes in the Earth's magnetic field caused by ferrous objects.
• 3 sensing elements provide measurements in the X, Y and Z axes to improve detection sensitivity when used in either above or below ground installations
• Equppied with new DETECT-ON-STOP feature, which allows detection only when a vehicle has come to a complete stop

EMX Carsense Driveway Sensor Probe Detector Only!!!