Photo Eyes

Provide 36 in. of coverage along each side of door to produce an invisible curtain of infrared light for maximum detection capability; IP67 rating provides protection against direct water spray and temporary submersion.

UNIVERSAL UL325 RETROREFLECTIVE PHOTOEYE KIT

• Kit includes photoeye with hood, reflector with hood, and mounting bracket
• Retroreflective configuration
• UL325-2018 compliant
• Six (6) monitoring interfaces
• 60 ft. operating range
• Easy installation and set-up
• Compatible with many operators

AOM-RED EYE Features 

• NC and 10K photo eye
• Visible red class2 laser beam with good aim allows installer to easily align with the reflector
• Excellent optical performance. Sensing range as far as 55 feet (100 feet with optional 4” square reflector)
• Non-sphere optical lens totally eliminates stray light and overcomes the interference from light sources (ie: sunlight)
• Red LED detects working status for easy installation and diagnosis LIGHT ON/DARK ON options
• Protection grade: IP65(IEC)
• UL325 compliant

Photobeam Replacement Cover for Models:

E-960-D90GQ
E-960-D90Q
E-960-D190Q
E-960-D290Q
E-964-D390Q

DKS Doorking 8080-060 Photo-Reflective Beam Deluxe

OPTEX Battery Powered Wireless Monitored Hybrid Through Beam Photo Eye (50 ft. Range Dual IR Beam) - OVS-50TNR

Liftmaster 041A4373ATS Safety Sensor Kit for ATS, 1993 to Present

‌BFT FL130B - Set of Photocells (P111043-00002)

Monitored entrapment protection devices are required to protect all entrapment zones in automated gate applications. Photo‐cells are used as type B1 (non‐contact sensors) devices. Electric edges are used as type B2 (contact sensors) devices.

• Thru beam configuration
• Wide sensing angle for increased reliability
• 115 ft. operating range
• NEMA 4X enclosure
• Designed to operate in areas with explosive environments
• NEC Class I, Groups B, C & D, Class II, Groups E, F & G CSA certified, CENELEC certified, EExd IIC
• Copper free aluminum with epoxy finish
• Potentiometer range adjustment to allow for more precise tuning to site
• Thru beam design is not affected by shiny surfaces
• Modulated infrared to reduce the effect of sunlight, fog, rain, dust and dirt
• No focusing lens

• Detection range: 50 feet
• Detection Angle: +/- 5%
• Power Supply: 12-24 VDC 24 VAC (2-3.6 Volt Lithium Batteries for transmitter optional; included)
• Expected Battery Life: 2 years
• Size: 4.4″ (112mm) x 2.05″ (52mm) x 1.3″ (33mm)

• Kit includes photoeye with hood, reflector with hood, and mounting bracket
• Retroreflective configuration
• 50 ft. operating range
• Sensitivity adjustment
• Wide range operating voltage
• IP66 enclosure

NON-MONITORED

What's included: 2 photoeyes (receiver and transmitter) (OLD PART# 785163)

Versatile Solution for entrapment protection
Long-Range Sensing Distance of up to 50 ft
Built-In Heater for dependable performance in most environments
Increased Beam Angle for simple, reliable alignment
Versatile Gimble Bracket for fine alignment and adjustability
Warranty 2 years