Loops

External Loop Detector Harness For All MAX Operators

• High Quality Blade
  
• Made for up to 25hp Saws
  
• 3/4” to 1” Arbor
  
• Pin Hole
  
• Wet Cutting Recommended
  
• Depth Gauge Cutting Guide
  

• High Quality Asphalt Blade
  
• Made for up to 25hp Saws
  
• 3/4” to 1” Arbor
  
• Pin Hole
  
• Wet Cutting Recommended
  
• Depth Gauge Cutting Guide
  

DKS DoorKing 9402-035 Loop Detector AX2DL-3-1C-NO

DKS DoorKing 9416-010 Loop Detector Low Power 1 Chnl

DKS DoorKing 9415-010 Loop Detector Low Power 2 Channel

10 Pin Card Rack used for the DSP-55, DSP-40 and AVI-40

Preformed 3/16” Saw-cut Loop used for saw-cut installations where a 3/16” groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface.

Preformed 3/16” Saw-cut Loop used for saw-cut installations where a 3/16” groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface.

Preformed 3/16” Saw-cut Loop used for saw-cut installations where a 3/16” groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface.

Preformed 3/16” Saw-cut Loop used for saw-cut installations where a 3/16” groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface.

Preformed 3/16” Saw-cut Loop used for saw-cut installations where a 3/16” groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface.

Preformed 3/16” Saw-cut Loop used for saw-cut installations where a 3/16” groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface.

Preformed 3/16” Saw-cut Loop used for saw-cut installations where a 3/16” groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface.

Preformed 3/16” Saw-cut Loop used for saw-cut installations where a 3/16” groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface.

Preformed 3/16” Saw-cut Loop used for saw-cut installations where a 3/16” groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface.

Preformed 3/16” Saw-cut Loop used for saw-cut installations where a 3/16” groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface.

Preformed 3/16” Saw-cut Loop used for saw-cut installations where a 3/16” groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface.