Safety Devices

• Triangular Planar Array Technology
• Aux. relay, settings for pulse on ENTRY, EXIT or BOTH
• Output delay option for 1, 2 and 4 seconds
• Operating range: 1ft. – 5ft.
• Response time: 2.0 seconds
• Supply Voltage12…24 VDC/VAC
• Relay output configuration: 2 SPDT (form C)
• CE compliant

The IXIO Mounting Bracket is for use with the IXIO-DT1 and IXIO-ST.

The bracket is used for applications where the sensor may not be mounted to a typical header location.

EDGE MUST BE AT LEAST 2 FEET SHORTER THAN THE OVERALL ARM LENGTH

(12 FOOT) REVERSE EDGE ONLY - ARM & HARDWARE KIT SOLD SEPARATELY

• Rugged and flexible TPE tubing
• Suitable for saw cut, tar and concrete installation
• Built-in electronic lightning protection
• Includes 50 or 100 ft. lead-in wire

BEA’s FOCUS FAMILY consists of focused active infrared-based presence sensors designed to effectively detect people and objects. These compact sensors can be used in a variety of applications where space may be limited or additional detection is required to complement pre-installed sensors, such as on revolving doors where pinch-zone protection is needed.

The FOCUS 2 offers the same protection as the FOCUS but can be recess mounted.

The SMART FOCUS provides internal and external self-monitoring. Single button setup ensures easy installation in most common applications.

The FOCUS FAMILY can be used on revolving doors, drive-thru windows, and in industrial applications such as gate and access control.

GREEN LED WHEN MOTIONING UPWARD

RED LED WHEN MOTIONING DOWNWARD

EDGE MUST BE AT LEAST 2 FEET SHORTER THAN THE OVERALL ARM LENGTH

(6 FOOT) REVERSE EDGE ONLY - ARM & HARDWARE KIT SOLD SEPARATELY

BEA’s FLY KIT is the industry’s most compact passive infrared (PIR) sensor, ideal for request to exit (REX) applications.

This low-cost, versatile sensor can be surface mounted above any door or recessed in the ceiling. Its flexibility and low profile design make it an effective sensor for managing building security and traffic flow.

GREEN LED WHEN MOTIONING UPWARD

RED LED WHEN MOTIONING DOWNWARD

EDGE MUST BE AT LEAST 2 FEET SHORTER THAN THE OVERALL ARM LENGTH

(9 FOOT) REVERSE EDGE ONLY - ARM & HARDWARE KIT SOLD SEPARATELY

BEA’s FLY KIT is the industry’s most compact passive infrared (PIR) sensor, ideal for request to exit (REX) applications.

This low-cost, versatile sensor can be surface mounted above any door or recessed in the ceiling. Its flexibility and low profile design make it an effective sensor for managing building security and traffic flow.

GREEN LED WHEN MOTIONING UPWARD

RED LED WHEN MOTIONING DOWNWARD

EDGE MUST BE AT LEAST 2 FEET SHORTER THAN THE OVERALL ARM LENGTH

(12 FOOT) REVERSE EDGE ONLY - ARM & HARDWARE KIT SOLD SEPARATELY

This is only one part of the two part LRS system. Either the LRS-C1 or the LRS-L controller will work with this sensor.

Not recommended for asphalt installations where temperatures exceed 100 degrees.

• Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
• Fits into small operator housings, saving space
• Easy to install and setup with the ULTRAMETER™ sensitivity display
• Low current draw – green product
• Easy identification of interference problems using the crosstalk and RFI interference display

Two-wire Non-Monitored Unit

Color: Black
Length: Per specification to nearest 1/4”
Max. Length: Up to 10 feet.
Lead Wire: SJTO, 18 gauge, 2ft. length
Sensitivity ME120: nominal 8-13 lbf MGO20 nominal 4-7 lbf
Electrical Diagram: 2 wire N.O. configuration
Electrical Maximum: 24 volt AC or DC,1/2 amp
Mechanical Diagram: See drawings on reverse side
Contact Element: Alumaglas Materials: Flexible PVC
Channel: Extruded PVC or Aluminum
Temperature Range: -30oF to +155oF
Wire Outlet Location: Right side, Left side or end

1 Year Warranty

AOM-RED EYE Features 

• NC and 10K photo eye
• Visible red class2 laser beam with good aim allows installer to easily align with the reflector
• Excellent optical performance. Sensing range as far as 55 feet (100 feet with optional 4” square reflector)
• Non-sphere optical lens totally eliminates stray light and overcomes the interference from light sources (ie: sunlight)
• Red LED detects working status for easy installation and diagnosis LIGHT ON/DARK ON options
• Protection grade: IP65(IEC)
• UL325 compliant

• Single or dual channel unit for US or EU wiring
• ULTRAMETER™ displays optimum sensitivity setting/crosstalk interference
• 10 sensitivity settings
• 4 operating frequencies
• Small size: 73 x 38 x 78mm
• Socket mount -11 pin (JEDEC B11-88)

Designed for use on a 2" square post. 5 foot tall. No mounting channel is required. 10K resistive monitoring, 2 wire universal output, and universal left/right mounting.