Safety Devices

BEA’s LZR-FLATSCAN 3D SW is a four-curtain, door-mounted, safety system for automatic swing doors. Using LASER Time-of- Flight technology, its three-dimensional detection field guarantees full-safety coverage of the opening area. Ideal for environments in healthcare, education, and commercial settings.

The deep detection pattern reduces sudden door movements, preventing contact as a person walks through the doorway, benefitting individuals with limited mobility, and reducing the wear and tear of the door. Additional safety features include Leading Edge Safety for detection beyond the door leaf and coverage of the hinge area with Finger Detection Technology^™.

Technicians can reduce installation and setup time with Hand Gesture Setup and the built-in knowing act device. Instead of coordinating and wiring activation devices, utilize Virtual Push Buttons for a non-contact form of door activation. Convenient in settings that rely on hygienic solutions, like surgical environments.

The LZR-FLATSCAN 3D SW is capable of exceeding the 156.10 section 8.2.2.3 standard for detection area and meets section 8.1.4 for monitoring.

BEA’s IXIO-ST INDUSTRIAL is an effective, versatile and easy-to-use presence sensor for interior industrial doors, automatic sliding doors and off-door industrial automation. It can be used for both clear door openings and side-lite protection.

Precise infrared curtains coupled with visible alignment beams make the IXIO-ST INDUSTRIAL extremely safe and easy to adjust. This state-of-the-art sensor features an on-board LCD screen that streamlines the installation and setup processes.

The IXIO-ST INDUSTRIAL has earned a comprehensive list of credentials and certifications, including FCC and IP54.

BEA’s IXIO-ST is an effective, versatile and easy-to-use presence sensor for automatic sliding doors. It can be used for both clear door openings and side-lite protection.

Precise infrared curtains coupled with visible alignment beams make the IXIO-ST extremely safe and easy to adjust. This state-of-the-art sensor features an on-board LCD screen that streamlines the installation and setup processes.

The IXIO-ST can be adjusted into an ANSI compliant solution and has earned a comprehensive list of credentials and certifications, including FCC and IP54.

BEA’s IXIO-DT1V is the premier motion and presence sensor for sliding doors. Coupled with the dual technology, the
IXIO-DT1V includes an NTSC-compliant video surveillance camera that provides high quality footage of those entering and exiting a building.

The IXIO-DT1V can be adjusted into ANSI compliance solution and has earned a comprehensive list of credentials and certifications, including FCC and IP54.

The high quality camera offers a wide field of view and is ideal for video documentation of pedestrian traffic, liability and warranty documentation, people counting and security applications, in a variety of environments.

The IXIO-DT1V ensures convenience, safety and energy efficiency on automatic sliding doors.

BEA’s dual technology IXIO-DT1 INDUSTRIAL is a highly flexible and user friendly motion and presence sensor for interior industrial doors, vehicle gate detection and off-door automation.

This cutting-edge sensor has earned an impressive list of credentials and certifications, including FCC and IP54.

BEA’s IXIO-DT1 is a dual technology motion and presence sensor, combining microwave activation and infrared presence detection for the automatic sliding door industry.

This solution is highly flexible and user-friendly for sliding doors, industrial doors, vehicle gate detection and off-door automation.

The IXIO-DT1 can be adjusted into ANSI compliance and has earned a comprehensive list of credentials and certifications, including FCC and IP54.

The IXIO-DT1 ensures convenience, safety and energy efficiency for BEA customers and end users.

BEA’s IS40 / IS40XL are dual technology sensors designed to provide motion and presence detection in industrial applications.

The standard IS40 can be mounted from 8 feet to 16 feet to fit any industrial application. For lower mounting heights, BEA’s IS40XL can be mounted from 6 ½ feet to 11 ½ feet.

Housed in a rugged IP65 rated enclosure, the IS40 / IS40XL will operate in harsh environments, capable of withstanding damage caused by wind-blown dust and rain and hose-directed water.

BEA’s IS40P is an infrared presence sensor designed for use in industrial applications. This sensor utilizes 40 active infrared spots for reliable presence detection.

The IS40P is ideal for use on automatic industrial doors, vehicles gates / barriers, loading docks and other applications
where presence detection is required. It can be mounted from 8 feet to 16 feet to fit most industrial applications.

Its rugged IP65 rated enclosure can withstand harsh environments and is capable of preventing damage caused by dust, rain and hose-directed water.

BEA’s IS40 / IS40XL are dual technology sensors designed to provide motion and presence detection in industrial applications.

The standard IS40 can be mounted from 8 feet to 16 feet to fit any industrial application. For lower mounting heights, BEA’s IS40XL can be mounted from 6 ½ feet to 11 ½ feet.

Housed in a rugged IP65 rated enclosure, the IS40 / IS40XL will operate in harsh environments, capable of withstanding damage caused by wind-blown dust and rain and hose-directed water.

BEA’s FOCUS FAMILY consists of focused active infrared-based presence sensors designed to effectively detect people and objects. These compact sensors can be used in a variety of applications where space may be limited or additional detection is required to complement pre-installed sensors, such as on revolving doors where pinch-zone protection is needed.

The FOCUS 2 offers the same protection as the FOCUS but can be recess mounted.

The SMART FOCUS provides internal and external self-monitoring. Single button setup ensures easy installation in most common applications.

The FOCUS FAMILY can be used on revolving doors, drive-thru windows, and in industrial applications such as gate and access control.

BEA 10EARA Eagle ARTEK Rain Accessory

Eagle Mounting Bracket Assembly

Eagle Mounting for Suspended Ceilings

BEA’s Eagle Family of motion sensors is designed for the activation of automatic pedestrian doors.

The Eagle is universally compatible with all makes and models of swinging, sliding and revolving automatic doors. The Eagle HM has a mounting height of 13 to 16.5 feet, making it ideal for use on large-format doors in industrial environments.

Unidirectional radar increases energy efficiency by detecting approaching traffic while ignoring motion away from the door.

BEA’s COLIBRI ONE is a motion sensor designed for the detection of pedestrians, slow moving vehicles and other objects in motion.

COLIBRI ONE has the sensitivity to detect objects moving as slow as 2 inches per second; and its compact size makes it a perfect motion detector for any commercial or industrial application, both indoor and outdoor.

Along with common pedestrian and industrial applications, this sensor has been used in custom mass transit configurations on trains and buses.