Safety Devices

PLEASE SEE COMPATIBLES LIST FOR FINISHING COMPONENTS

PLEASE SEE COMPATIBLES LIST FOR FINISHING COMPONENTS

PLEASE SEE COMPATIBLES LIST FOR FINISHING COMPONENTS

PLEASE SEE COMPATIBLES LIST FOR FINISHING COMPONENTS

Low Profile Rubber Edge, 98 Foot Roll

PLEASE SEE COMPATIBLES LIST FOR FINISHING COMPONENTS

• Plug-In Loop Detector
• Three Channel
• Three Selectable Sensitivities and Four Selectable Frequencies per Channel
• Single Output
• Wrong Voltage Protection
• Runs on 10 to 30 Volts DC, 5mA nominal
• Selectable 15 or 60 minute presence time
• Loop Scanning prevents cross-talk
• Automatic Sensitivity Boost
• Separate Power/Fault and Detect Indicators
• Compatible with all All-O-Matic and Viking Operators, but can be hard-wired to any Gate Operator

Plug-in compatible with LiftMaster® Operators
• 4 Selectable Sensitivities
• 4 Selectable Frequencies
• Wrong Voltage Protection
• Separate Power/Fault and Detect Indicators
• Automatic Sensitivity Boost
• Power Supply Requirement 10 to 24 Volts DC, 5mA nominal
• Selectable Presence Times
• Permanent Presence Option

DKS Doorking 8080-060 Photo-Reflective Beam Deluxe

TOMAR 2795-2 Dual Strobeswitch assembly with 1790M-2 power module

BEA’s FALCON FAMILY of sensors is the premier microwave activation solution for indoor and outdoor industrial applications. The family includes the FALCON, FALCON XL (extra low mount) and FALCON WIDE (for wide detection areas).

BEA’s FALCON FAMILY is ideal for automatic industrial doors, vehicle gates / barriers, vehicle detection, loading docks or any other industrial application where motion detection is required.

Housed in a NEMA 4 rated enclosure, the FALCON FAMILY is designed to operate in harsh environments.

Features:

• Power supply 10-30 V AC/DC max 1 W
• Relay outputs max 2A 230 VAC
• 11-pin plug-in base
• Automatic adjustment of the operating frequency
• Self-setting at power-up
• Loop fault signal
• Operating ambient temperature: -35°F to +158°F (-37°C to +70°C)

• The OVS-01CC is designed to reliably detect the presence of a stationary or moving vehicle
• Can be mounted 2 to 3 feet off the ground and can detect both small and large vehicles
• The OVS-01CC features 8 range settings for the microwave from 3' to 26'
• The simple-to-use menu also has 5 settings for Human Cancellation Adjustment, 5 Sensitivity settings, and One-Touch Calibration.

OPTEX Battery Powered Wireless Monitored Hybrid Through Beam Photo Eye (50 ft. Range Dual IR Beam) - OVS-50TNR

• Over 19,000 codes to choose from
• Can be programmed to accept up to 4 different codes
• Operates on 8 to 35 volts DC
• Can be field programmable with the “Learn” pushbutton
• No switches to set
• Small profile, perfect for many installations
• Responds to transmitters made by other manufacturers

FAAC USA 2681 Plug-In Loop Detector, 24 VDC, 10 pin

Liftmaster 041A4373ATS Safety Sensor Kit for ATS, 1993 to Present

FAAC USA 2670.1 Loop Detector Rack for EO24U Board