Safety Devices

BEA’s SUPERSCAN-T is a door mounted, active infrared safety sensor designed for use on automatic swinging, revolving, folding and low energy doors.

The SUPERSCAN-T uses triangulation to detect the presence of a pedestrian, while the door is opening and closing.

The SUPERSCAN-T can be used as an individual module or daisy chained with additional secondary modules. This flexibility allows the SUPERSCAN-T to be used on both narrow and wide doors. Each module detection zone can be adjusted independently.

BEA’s SUPERSCAN-T is a door mounted, active infrared safety sensor designed for use on automatic swinging, revolving, folding and low energy doors.

The SUPERSCAN-T uses triangulation to detect the presence of a pedestrian, while the door is opening and closing.

The SUPERSCAN-T can be used as an individual module or daisy chained with additional secondary modules. This flexibility allows the SUPERSCAN-T to be used on both narrow and wide doors. Each module detection zone can be adjusted independently.

BEA’s SPARROW is a highly flexible motion sensor designed to detect people and vehicles in a variety of industrial, security and pedestrian applications.

The SPARROW’s adjustable microwave antenna can be rotated ±120 degrees to create different sensing fields, capable of detecting bi-directional traffic (two way), unidirectional (approach only) and unidirectional away (departure only).

The SPARROW is designed to operate in industrial or harsh environments. It is ideal for motion detection applications including vehicle sensing, access control and warning indication

BEA’s FOCUS FAMILY consists of focused active infrared-based presence sensors designed to effectively detect people and objects. These compact sensors can be used in a variety of applications where space may be limited or additional detection is required to complement pre-installed sensors, such as on revolving doors where pinch-zone protection is needed.

The FOCUS 2 offers the same protection as the FOCUS but can be recess mounted.

The SMART FOCUS provides internal and external self-monitoring. Single button setup ensures easy installation in most common applications.

The FOCUS FAMILY can be used on revolving doors, drive-thru windows, and in industrial applications such as gate and access control.

BEA’s QUADSCAN is a presence sensor designed for use on pedestrian automatic swinging doors.

The QUADSCAN can be mounted at heights ranging from 43 to 118 inches. At a 78-inch mounting height, four active infrared safety spots provide approximately 15.75 inches of safety protection per sensor.

The QUADSCAN output offers individual safety side and approach side relays.

Four DIP switches provide user friendly adjustment for door side, AIR frequency, background reflectivity and uncovered zone height.

BEA’s QUADSCAN is a presence sensor designed for use on pedestrian automatic swinging doors.

The QUADSCAN can be mounted at heights ranging from 43 to 118 inches. At a 78-inch mounting height, four active infrared safety spots provide approximately 15.75 inches of safety protection per sensor.

The QUADSCAN output offers individual safety side and approach side relays.

Four DIP switches provide user friendly adjustment for door side, AIR frequency, background reflectivity and uncovered zone height.

BEA’s QUADSCAN is a presence sensor designed for use on pedestrian automatic swinging doors.

The QUADSCAN can be mounted at heights ranging from 43 to 118 inches. At a 78-inch mounting height, four active infrared safety spots provide approximately 15.75 inches of safety protection per sensor.

The QUADSCAN output offers individual safety side and approach side relays.

Four DIP switches provide user friendly adjustment for door side, AIR frequency, background reflectivity and uncovered zone height.

BEA’s PHOENIX EX^TM Family combines a microwave motion detection sensor in an explosion-proof / flame-proof housing, which is ideal for use in unique environments such as chemical manufacturing, petroleum refining and military facilities.

The PHOENIX EX^TM Family is designed to detect within a desired area for security or intrusion detection, warning indication and automation. When tied into a security system, the PHOENIX EX^TM Family offers a monitoring feature via end-of-line resistors. These resistors provide unique output states, which allow differentiation between an motion detection signal and/or an interruption in functionality due to tampering of the device.

The explosion-proof / flame-proof housing is a waterproof-rated enclosure designed as an IP66 housing. This housing achieves UL Class I, Div. 1, Groups B, C, D; Class II, Div. 1 & 2, Groups E, F, G; and Class III

BEA’s PHOENIX EX^TM Family combines a microwave motion detection sensor in an explosion-proof / flame-proof housing, which is ideal for use in unique environments such as chemical manufacturing, petroleum refining and military facilities.

The PHOENIX EX^TM Family is designed to detect within a desired area for security or intrusion detection, warning indication and automation. When tied into a security system, the PHOENIX EX^TM Family offers a monitoring feature via end-of-line resistors. These resistors provide unique output states, which allow differentiation between an motion detection signal and/or an interruption in functionality due to tampering of the device.

The explosion-proof / flame-proof housing is a waterproof-rated enclosure designed as an IP66 housing. This housing achieves UL Class I, Div. 1, Groups B, C, D; Class II, Div. 1 & 2, Groups E, F, G; and Class III

BEA’s PHOENIX EX^TM Family combines a microwave motion detection sensor in an explosion-proof / flame-proof housing, which is ideal for use in unique environments such as chemical manufacturing, petroleum refining and military facilities.

The PHOENIX EX^TM Family is designed to detect within a desired area for security or intrusion detection, warning indication and automation. When tied into a security system, the PHOENIX EX^TM Family offers a monitoring feature via end-of-line resistors. These resistors provide unique output states, which allow differentiation between an motion detection signal and/or an interruption in functionality due to tampering of the device.

The explosion-proof / flame-proof housing is a waterproof-rated enclosure designed as an IP66 housing. This housing achieves UL Class I, Div. 1, Groups B, C, D; Class II, Div. 1 & 2, Groups E, F, G; and Class III

BEA’s PHOENIX EX^TM Family combines a microwave motion detection sensor in an explosion-proof / flame-proof housing, which is ideal for use in unique environments such as chemical manufacturing, petroleum refining and military facilities.

The PHOENIX EX^TM Family is designed to detect within a desired area for security or intrusion detection, warning indication and automation. When tied into a security system, the PHOENIX EX^TM Family offers a monitoring feature via end-of-line resistors. These resistors provide unique output states, which allow differentiation between an motion detection signal and/or an interruption in functionality due to tampering of the device.

The explosion-proof / flame-proof housing is a waterproof-rated enclosure designed as an IP66 housing. This housing achieves UL Class I, Div. 1, Groups B, C, D; Class II, Div. 1 & 2, Groups E, F, G; and Class III

BEA’s PHOENIX EX^TM Family combines a microwave motion detection sensor in an explosion-proof / flame-proof housing, which is ideal for use in unique environments such as chemical manufacturing, petroleum refining and military facilities.

The PHOENIX EX^TM Family is designed to detect within a desired area for security or intrusion detection, warning indication and automation. When tied into a security system, the PHOENIX EX^TM Family offers a monitoring feature via end-of-line resistors. These resistors provide unique output states, which allow differentiation between an motion detection signal and/or an interruption in functionality due to tampering of the device.

The explosion-proof / flame-proof housing is a waterproof-rated enclosure designed as an IP66 housing. This housing achieves UL Class I, Div. 1, Groups B, C, D; Class II, Div. 1 & 2, Groups E, F, G; and Class III

BEA’s PHOENIX EX^TM Family combines a microwave motion detection sensor in an explosion-proof / flame-proof housing, which is ideal for use in unique environments such as chemical manufacturing, petroleum refining and military facilities.

The PHOENIX EX^TM Family is designed to detect within a desired area for security or intrusion detection, warning indication and automation. When tied into a security system, the PHOENIX EX^TM Family offers a monitoring feature via end-of-line resistors. These resistors provide unique output states, which allow differentiation between an motion detection signal and/or an interruption in functionality due to tampering of the device.

The explosion-proof / flame-proof housing is a waterproof-rated enclosure designed as an IP66 housing. This housing achieves UL Class I, Div. 1, Groups B, C, D; Class II, Div. 1 & 2, Groups E, F, G; and Class III

BEA’s MATRIX FAMILY of induction loop detectors is designed for vehicle detection application in industrial environments.

These UL 508 listed loop detectors offer a wide range of features including automatic boost sensitivity (ABS), pulse on entry and pulse on exit. The MATRIX 3 provides learn on power up, as well as an independent dual loop detection setting.

The MATRIX FAMILY includes single and dual loop detectors with operating voltages of 110 – 120 VAC or 12 – 24 VAC / VDC, depending on model.

BEA’s MATRIX FAMILY of induction loop detectors is designed for vehicle detection application in industrial environments.

These UL 508 listed loop detectors offer a wide range of features including automatic boost sensitivity (ABS), pulse on entry and pulse on exit. The MATRIX 3 provides learn on power up, as well as an independent dual loop detection setting.

The MATRIX FAMILY includes single and dual loop detectors with operating voltages of 110 – 120 VAC or 12 – 24 VAC / VDC, depending on model.

BEA’s MATRIX FAMILY of induction loop detectors is designed for vehicle detection application in industrial environments.

These UL 508 listed loop detectors offer a wide range of features including automatic boost sensitivity (ABS), pulse on entry and pulse on exit. The MATRIX 3 provides learn on power up, as well as an independent dual loop detection setting.

The MATRIX FAMILY includes single and dual loop detectors with operating voltages of 110 – 120 VAC or 12 – 24 VAC / VDC, depending on model.

BEA’s MATRIX FAMILY of induction loop detectors is designed for vehicle detection application in industrial environments.

These UL 508 listed loop detectors offer a wide range of features including automatic boost sensitivity (ABS), pulse on entry and pulse on exit. The MATRIX 3 provides learn on power up, as well as an independent dual loop detection setting.

The MATRIX FAMILY includes single and dual loop detectors with operating voltages of 110 – 120 VAC or 12 – 24 VAC / VDC, depending on model.

BEA’s LZR-U920 / U921 are LASER-based measurement devices measuring distances on up to four planes. The LZR-U920 / U921 can be installed to scan in any direction.

This family of sensors is designed to provide the user with the highest degree of flexibility. It communicates the raw measurement data for further calculation or control tasks.