Power

FEATURES

• Input voltage: 20 ~ 30VAC
• Output voltoge: 12VDC ±5%
• Output current: 3A （for LED, and long distance transmit）
• Output short circuit protection
• Overload protection
• Auto select 24VAC / 12VDC

‌

Toroid Box For Max super arm 2300, MAX ARM

Megatron power supply assembly

MAX SOLAR PACK BOX Solar Pack Box Only. Heavy-Duty Sheet Metal Gold Zinc Powder-Coated Built-in Key Lock Mounting bracket for 3-inch pipe and square tube.

WILL ONLY WORK WITH MAXIMUM CONTROLS PRODUCTS

MAX SOLAR PACK for any remote application that requires 24V, designed for use in Max Control's pad mount gate operators but can be used to power low amp draw applications requiring a 24VDC power source.

FOR USE WITH MAXIMUM CONTROLS PRODUCTS ONLY

‌FAAC USA 63000169 B680H S Spring

DKS DoorKing 1601-426 12 VDC 8.5 Amp LED Power Supply

DKS DoorKing 1601-424 12 VDC 12.5 Amp LED Power Supply

• Power Supply/Charger Board.
• 12VDC or 24VDC @ 6A.
• AC and battery monitoring, non-power limited output.
• UL Recognized.

• Two (2) 12VDC or 24VDC Class 2 Rated Power-Limited Outputs.
• Built-in charger for sealed lead acid or gel type batteries.
• Instantaneous transfer to stand-by batteries.
• Short circuit and overload protection.
• AC input and unit status indicator on the front panel.
• Normally Open [NO] trigger input.
• Supervised Fire Alarm Disconnect (Latching with reset or Non-Latching).
• UL Listed in the U.S. and Canada.
• NFPA and MEA Approved.
• Lifetime Warranty / Made in the U.S.A.
• Input 115VAC, 50/60Hz, 0.6 amp
• Access control trigger input
• 12VDC or 24VDC selectable outputs
• 1 amp supply current
• PTC protected outputs, rated @ 2.5 amp

• Power Supply/Charger Board - 12VDC @ 10A.
• AC and battery monitoring, non power-limited output.
• UL Recognized.

• Access Power Controller with power supply.
• 8 fused power limited outputs provide 12VDC or 24VDC @ 6A.
• Outputs are individually selectable for Fail-Safe or Fail-Secure operation or as dry form "C" contacts.

• 100~220 VAC Input
• Adjustable output to reduce voltage drop
• Each output individually protected by a PTC fuse
• PTC fuses rated [email protected]~13.8 VDC
• Power output ON/OFF switch
• Individual output status LEDs
• Convenient AC input and DC output status LEDs on cover
• Heavy-duty steel case with cover
• Built-in short circuit and overheat protection
• 3.3ft (1m) Power cord included
• UL listed for 90~120 VAC

• 100~220 VAC Input*
• Adjustable output to reduce voltage drop
• Each output individually protected by a PTC fuse
• PTC fuses rated [email protected]~13.8 VDC
• Power output ON/OFF switch
• Individual output status LEDs
• Convenient AC input and DC output status LEDs on cover
• Heavy-duty steel case with cover
• Built-in short circuit and overheat protection
• 3.3ft (1m) Power cord included
• UL listed for 90~120 VAC

• Low-noise design for all CCTV applications where filtered power is needed, such as 4K (8MP) HD CCTV cameras, non-PoE IP cameras, and analog cameras
• 110/220 VAC input with 6kV surge protection
• Each output’s voltage individually adjustable to compensate for voltage drop
• Outputs independently grounded with integrated noise filter for better noise reduction
• Outputs individually isolated and individually fused (2A PTC)
• Individual output status LEDs
• Heavy-duty steel case with cover and cam lock
• Built-in short circuit and overheat protection

Features:

• 1.5 Amp charger and maintainer
• LED indicator lights
• Automatically switches from Full Charge to Float-Mode Monitoring
• Includes quick-disconnect harness (Snap either connector into place in seconds; Use the 50 amp clamps or permanently attach the ring connectors)
• Reverse-hookup protection
• Automatically determines whether the connected battery is a 6V or 12V battery
• Size: 9.25 x 7 x 8 inches