Gate Operators

(1) MONITORED SAFETY DEVICE REQUIRED

Operator is 24 Volt DC and includes built-in battery backup, 115/230 VAC Input (switch selectable) or 24 VDC Solar Power Input, 1/2 HP Quadra Drive Heavy-Duty DC Motor.

(2) MONITORED SAFETY DEVICES REQUIRED

Maximum gate width: 40 ft

Maximum gate weight: 1000 pounds

The 9575 Series is available in 208VAC, 230VAC, or 460VAC. Includes a three phase, 7.5 Hp motor. Gearbox ratio is 10:1. Magnetic brake standard. Up to 160' wide x 25,000 lbs Class III and Class IV installations only. Continuous Duty Open: 1-2 ft Per Second. Pedestal Base Standard & 20 feet of #100 Chain. Minimum gate length of 25'.

(2) MONITORED SAFETY DEVICES REQUIRED

15,000 lbs. max. weight / 160 ft. max. width

460VAC, 3PH, 5Hp Motor

Includes 20 feet of #100 chain

Maximum gate operation speed is 2 feet per second

Chain support tray (2601-270) should be used on gates exceeding 20 feet in length

(2) MONITORED SAFETY DEVICES REQUIRED

Maximum gate length: 75 feet
Maximum gate weight: 8000 lbs

(2) MONITORED SAFETY DEVICES REQUIRED

Maximum gate length: 100 feet
Maximum gate weight: 3000 lbs

(2) MONITORED SAFETY DEVICES REQUIRED

The 9210-380 through -091 connect to 115VAC 1Ø-460VAC 3Ø and has a 1 Hp motor, with 2000 lbs max for #50 chain and 3000 lbs. max. for #60 chain / 100 ft. max. width. Pad mount, 20 ft. of #50 or #60 chain included.(depending on machine configuration selected) Must use Doorking Loop Detectors (if using) Mounting pedestal required Chain tray required for installations longer than 20 feet

(1) MONITORED SAFETY DEVICE REQUIRED

DKS Max Gate Weight 2000lbs*, Max Gate Length 25', Continuous Duty, 1 HP, 115V (9.7A), Pad Mount, Arm Included. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)

(2) MONITORED SAFETY DEVICES REQUIRED

15,000 lbs. max. weight / 160 ft. max. width

208VAC, 3PH, 5Hp Motor

Includes 20 feet of #100 chain

Maximum gate operation speed is 1 foot per second

Chain support tray (2601-270) should be used on gates exceeding 20 feet in length

(1) MONITORED SAFETY DEVICE REQUIRED

Maximum gate width 18-ft. (1/2 HP) or 22-ft. (1 HP)

Maximum gate weight 700 pounds* (1/2 HP) or 800 pounds* (1 HP) (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)

Monitored Safety Device Required.

The 6300 includes a 1/2 Hp motor - 700 lbs. max. weight / 18 ft. max. width (per gate) Must purchase mount kit separately. Machine needs a monitored safety device to operate.

Monitored Safety Device Required

DKS master/secondary operator combination

Continuous Duty, 1/2HP 115VAC 5.4amp.

Max Gate Weight 500 lbs, Max Gate Length 14'

Includes: 

(1) Master Operator

(1) Slave Operator with 40' of Gate Connection Cable 

(2) POST Mount Kits

MONITORED SAFETY DEVICE REQUIRED

Max Gate Weight: 500lbs - Max Gate Length: 14'

Continuous Duty, 1/2HP 115VAC 5.4amp

Arm/Mount Kit Sold Separately/

MONITORED SAFETY DEVICE REQUIRED

1/2 Hp Motor - Max Gate Weight 400 lbs, Max Gate Length 10'

Arm/Mount Kit Sold Separately

INCLUDES:

(1) Master Operator

(1) Slave Operator

(1) 50' of Connection Cable

MONITORED SAFETY DEVICE REQUIRED

1/2 Hp Motor

Max Gate Weight 400 lbs, Max Gate Length 10'

Arm/Post Mount Kit Sold Separately

(2) MONITORED SAFETY DEVICES REQUIRED

The 9000 includes a 1 Hp motor - 1500 lbs. max. weight / 35 ft. max. width

(2) MONITORED SAFETY DEVICES REQUIRED

1/2 Hp motor - 1000 lbs. max. weight / 35 ft. max. width (per gate)

(1) MONITORED SAFETY DEVICE REQUIRED

Maximum gate width 18-ft. (1/2 HP) or 22-ft. (1 HP)

Maximum gate weight 700 pounds* (1/2 HP) or 800 pounds* (1 HP) (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)