Gate Operators
-
DKS DoorKing 9575 Series 7.5 Hp Slide Gate Operator
The 9575 Series is available in 208VAC, 230VAC, or 460VAC. Includes a three phase, 7.5 Hp motor. Gearbox ratio is 10:1. Magnetic brake standard. Up to 160' wide x 25,000 lbs Class III and Class IV installations only. Continuous Duty Open: 1-2 ft Per Second. Pedestal Base Standard & 20 feet of #100 Chain. Minimum gate length of 25'.
dks:9575 -
DKS DoorKing 9555-380 5 Hp Slide Gate Operator
(2) MONITORED SAFETY DEVICES REQUIRED
15,000 lbs. max. weight / 160 ft. max. width
460VAC, 3PH, 5Hp Motor
Includes 20 feet of #100 chain
Maximum gate operation speed is 2 feet per second
Chain support tray (2601-270) should be used on gates exceeding 20 feet in length
dks:9555 -
DKS DoorKing 9210 1 Hp Slide Gate Operator
(2) MONITORED SAFETY DEVICES REQUIRED
The 9210-380 through -091 connect to 115VAC 1Ø-460VAC 3Ø and has a 1 Hp motor, with 2000 lbs max for #50 chain and 3000 lbs. max. for #60 chain / 100 ft. max. width. Pad mount, 20 ft. of #50 or #60 chain included.(depending on machine configuration selected) Must use Doorking Loop Detectors (if using) Mounting pedestal required Chain tray required for installations longer than 20 feet
dks:9210 -
DKS DoorKing 6550-380 1 Hp Swing Gate Operator
(1) MONITORED SAFETY DEVICE REQUIRED
DKS Max Gate Weight 2000lbs*, Max Gate Length 25', Continuous Duty, 1 HP, 115V (9.7A), Pad Mount, Arm Included. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
dks:6550380 -
FAAC USA 770 24VDC Dual Swing Gate Operator Kit
Max Weight -Â 800 lbs
Max Width -Â 10Â ft
Kit Includes:
(1) E024U Enclosure Kit
(2) 770 Gate Arms
(2) Support Boxes
(1) Junction Box for electrical connections
(2) 12V 8Ah Batteries
(1) 433 RC Plug In Radio ReceiverÂ
(2) 4-Channel XT4 433 RC TransmittersÂ
(1) Pair of XP 30 photobeam photocells
(2) XP 30 adapters for conduit connection
(40)Â FEETÂ of AWG 12 Cable - (2 Conductors Cable)
Monitored Safety Device Required
faac:106753.5,10675315.5 -
FAAC USA 770 24VDC Single Swing Gate Operator Kit
Max Weight -Â 800 lbs
Max Width -Â 10Â ft
Kit Includes:
(1) E024U Enclosure Kit
(1) 770 Gate ArmÂ
(1) Support Box
(2) 12V 8Ah Batteries
(1) 433 RC Plug In Radio ReceiverÂ
(2) 4-Channel XT4 433 RC TransmittersÂ
(1) Pair of XP 30 photobeam photocells
(2) XP 30 adapters for conduit connection
Monitored Safety Device Required
faac:106753.5 -
FAAC USA 390 24VDC Dual Swing Gate Operator Kit
Max Weight -Â 600 lbs
Max Width -Â 14Â ft
Kit Includes:
(1) E024U Enclosure Kit
(1) Limit Switch Kit
(2) 390 Gate ArmsÂ
(2) 12V 8Ah Batteries
(1) Junction Box for electrical connections
(1) 433 RC Plug In Radio ReceiverÂ
(2) 4-Channel XT4 433 RC TransmittersÂ
(1) Pair of XP 30 photobeam photocells
(2) XP 30 adapters for conduit connection
(40) FEET of AWG 12 Cable - (2 Conductors Cable)
(40)Â FEETÂ of AWG 18 Cable - (3 Conductors Cable)
Monitored Safety Device Required
faac:104572.5,1045791.5 -
FAAC USA 390 24VDC Single Swing Gate Operator Kit
Max Weight -Â 600 lbs
Max Width -Â 14Â ft
Kit Includes:
(1) E024U Enclosure Kit
(1) Limit Switch Kit
(1) 390 Gate ArmÂ
(2) 12V 8Ah Batteries
(1) 433 RC Plug In Radio ReceiverÂ
(2) 4-Channel XT4 433 RC TransmittersÂ
(1) Pair of XP 30 photobeam photocells
(2) XP 30 adapters for conduit connection
Monitored Safety Device RequiredÂ
faac:104572.5 -
FAAC USA 400 CBACEG 115V Long Dual Swing Gate Operator Kit
Max Weight -Â 1500 lbs
Max Width -Â 18Â ft
Kit Includes:
(1) 455D Control Panel
(1) Prewired Fiberglass Enclosure - 14"x16"
(2) 400 CBAC Gate Arms
(1) 433 RC Plug In Radio ReceiverÂ
(2) 4-Channel XT4 433 RC TransmittersÂ
(1) Pair of XP 30 photobeam photocells
Monitored Safety Device RequiredÂ
faac:10420212.5,104202125