Gate Operators

The 912L-2 Kit includes a 42' harness, mounting hardware and pivot arm necessary for installation. Add to the TITAN12L or TITAN12L1 single gate operators for dual gate functionality

MONITORED SAFETY DEVICE REQUIRED

1/2 Hp Motor

Max Gate Weight 400 lbs, Max Gate Length 10'

Includes 50' of M/S Cable, No Control Board, Cannot Be Used Alone

Arm/Mount Kit Sold Separately

DKS 6400 Dual Underground Deluxe Kit Includes:

• 6400-380 (2) Operator Arms
• 4302-312 (1) Deluxe Control Box
• 1801-009 (2) 3.4Ah Batteries
• 2600-755 (30 Feet) Connection Cable
• 8080-057 (1) Photobeam Reflective DKS 10k
• 8040-080 (1) Receiver MicroPLUS/Clik 318MHz
• 8069-080 (2) Transmitter MicroPLUS 1B 318Mz

DKS 6400 Dual Underground Standard Kit Includes:

• 6400-380 (2) Operator Arms
• 4302-311 (1) Standard Control Box
• 1801-009 (2) 3.4Ah Batteries
• 2600-755 (30 Feet) Connection Cable
• 8080-057 (1) Photobeam Reflective DKS 10k
• 8040-080 (1) Receiver MicroPLUS/Clik 318MHz
• 8069-080 (2) Transmitter MicroPLUS 1B 318Mz

DKS 6400 Single Underground Deluxe Kit Includes:

• 6400-380 (1) Operator Arm - Includes 6 feet of cable
• 4302-312 (1) Deluxe Control Box
• 1801-009 (2) 3.4Ah Batteries
• 8080-057 (1) Photobeam Reflective DKS 10k
• 8040-080 (1) Receiver MicroPLUS/Clik 318MHz
• 8069-080 (2) Transmitter MicroPLUS 1B 318Mz

DKS 6400 Single Underground Standard Kit Includes:

• 6400-380 (1) Operator Arm - Includes 6 feet of cable
• 4302-311 (1) Standard Control Box
• 1801-009 (2) 3.4Ah Batteries
• 8080-057 (1) Photobeam Reflective DKS 10k
• 8040-080 (1) Receiver MicroPLUS/Clik 318MHz
• 8069-080 (2) Transmitter MicroPLUS 1B 318Mz

DKS SWG Secondary Operator Only, Max Gate Weight 700lbs, Max Gate Length 18'. Includes 50' Of M/S Cable, Mount Kit Control Board Sold Separately, Can Not Be Used Alone. Must purchase mount kit separately. Machine needs a monitored safety device to operate.

Monitored Safety Device Required. The DKS 6400 installs in-ground making it virtually invisible and satisfies the most sophisticated automation needs without being detrimental to the original gate design. The 6400 operates on 24 Volt DC power (AC is converted to DC in the control panel).

(1) MONITORED SAFETY DEVICE REQUIRED

Maximum gate width 18-ft. (1/2 HP) or 22-ft. (1 HP)

Maximum gate weight 700 pounds* (1/2 HP) or 800 pounds* (1 HP) (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)

MONITORED SAFETY DEVICE REQUIRED

Max Gate Weight: 500lbs - Max Gate Length 14'

Continuous Duty, 1/2HP 115VAC 5.4amp

Includes 30' of M/S Cable, No Control Board, Cannot Be Used Alone

MOUNT KIT SOLD SEPARATELY