Gate Operators

D&D SureClose Flush Mount Thrust Bearing Hinge Closer, 57SF AT90 S - 75057223M. The SureClose Thrust Bearing Hinge Closer Series is a concealed hydraulic gate closer. It is speed adjustable using the enclosed adjustment tool and specially designed to never leak hydraulic fluid. It is one of the safest hinge closers available on the market today and holds the ability to close quickly with no resistance in emergency situations. This delicate closing technology also protects the latching and locking mechanisms, guaranteeing at least 500,000 open/close cycles and a 1,500 lb. point load.

Features:

• Hinge Type: 57SF AT90 S
• Self-Closing From: 88 degrees
• Maximum Opening Swing: 88 degrees
• Pool/Child Safety: YES
• Hinge Gap: 1/2"
• Fence Post Size: 2"+
• Mount Type: Flush Mount

*Please Note: Gate will not hold open at 90 degrees (making it okay for use on pool and child safety gates). SureClose SF models require a separate gate stop to be installed to prevent the gate from being forced past 90 degrees. Recommended opening setting is 85 degrees to take into consideration possible installation abnormalities. To properly install this gate closer, you will need to purchase the D&D GateStop - Soft, Quiet Gate Closure - TCGS3, sold separately. Absence of a gate stop will void warranty on this product. D&D recommends installing the gate stop at the bottom of the fence post if gate is lower than 84" (210cm).

These strong and sturdy hinge-closers provide smooth, bind-free performance. Superb engineering and patented design allow clever concealment of the hydraulics in a remarkably small housing. SureClose 108 and 57 models are concealed hydraulic gate closers. Designed to never leak hydraulic fluid, the SureClose 108 or 57 are extremely safe and do not offer resistance if closed quickly in an emergency. Soft, quiet closure also protects the latching/locking system. All SureClose hinges and closers come packaged with the gate mounting bracket included. Post-mounting brackets are sold separately. Aluminum gate mounting brackets: Pre-drill using a 5mm drill bit and use #14 countersunk through-bolts or fasteners. See post brackets for their fastener requirements.

Note: When installing this hinge to a swimming pool gate always confirm any safety requirements with your local Council or authorities to ensure compliance.

These strong and sturdy hinge-closers provide smooth, bind-free performance. Superb engineering and patented design allow clever concealment of the hydraulics in a remarkably small housing. Designed to never leak hydraulic fluid, the SureClose 108 or 57 are extremely safe and do not offer resistance if closed quickly in an emergency. Soft, quiet closure also protects the latching/locking system. SureClose 108SF and 57SF models are suitable for pool and safety gates. All SureClose hinges and closers come packaged with the gate mounting bracket included. Post-mounting brackets are sold separately. Aluminum gate mounting brackets: Pre-drill using a 5mm drill bit and use #14 countersunk through bolts or fasteners. See post brackets for their fastener requirements.

 These strong and sturdy hinge-closers provide smooth, bind-free performance. Superb engineering and patented design allow clever concealment of the hydraulics in a remarkably small housing. SureClose 108SF and 57SF models are suitable for pool and safety gates. SF models open to and self-close from 90 degrees;* NO hold-open feature. All SureClose hinges and closers come packaged with the gate mounting bracket included. Post-mounting brackets are sold separately. Aluminum gate mounting brackets: Pre-drill using a 5mm drill bit and use #14 countersunk through-bolts or fasteners. See post brackets for their fastener requirements.

These strong and sturdy hinge-closers provide smooth, bind-free performance. Superb engineering and patented design allow clever concealment of the hydraulics in a remarkably small housing. All SureClose® hinges and closers come packaged with the gate mounting bracket included. Post-mounting brackets are sold separately. Aluminum gate mounting brackets: Pre-drill using a 5mm drill bit and use #14 countersunk through bolts or fasteners. See post brackets for their fastener requirements.

These strong and sturdy hinge-closers provide smooth, bind-free performance. Superb engineering and patented design allow clever concealment of the hydraulics in a remarkably small housing.

Features

• Internally Mounted, Hydraulic, Gate Hinge-Closers
• Maintenance free
• Multiple adjustment options
• Prevents gate slam noise & gate damage
• 50 Micron hard anodizing (Aluminium Components)
• High corrosion resistance
• 5-Year Limited Warranty

These strong and sturdy hinge-closers provide smooth, bind-free performance.  They provide convenient screw slots and holes for a sturdy fix. 25mmx12g self-drilling Tek screws are supplied. The slots allow fine vertical adjustment for speedy gate alignment. Horizontal adjustment is attained by way of a built-in, adjustable locking ring that rotates in or out as required to ensure the gate is level and overall alignment is achieved. All SureClose® Hinges and Closers are made of high-grade aluminum.

CAUTION: When used on a swimming pool gate, always consult local authorities for swimming pool Codes. A gate stop must be installed when using SF models. Gate must not be allowed to open past 90˚. Doing so voids warranty.

D&D Technologies SureClose ReadyFit RF 108 W Steel Hinge/Closer, Externally Mounted, Hydraulic Self-Closing Hinge-Closer with Hold Open.

Features

• Controlled quiet close
• Flush Mount
• Final Snap Close Action
• The face of the gate and posts are aligned.
• Include fasteners, gate and post mounting brackets.

Manufacturer's Warranty

• 5-Year Limited Warranty

Hydraulic SureClose Gate Closers & Hinges are designed to replace conventional, bulky commercial gate hinges and closers. These strong and sturdy hinge-closers provide smooth, bind-free performance. Each ‘ReadyFit’ model lives up to its name by providing convenient screw slots and holes for sturdy fixing. 25mmx12g self-drilling Tek screws are supplied. The slots allow fine vertical adjustment for speedy gate alignment. Horizontal adjustment is attained by way of a built-in, adjustable locking ring that rotates in or out as required to ensure the gate is level and overall alignment is achieved. It’s remarkably simple for a commercial-style gate closer product. All SureClose® Hinges and Closers are made of high-grade aluminum.

This SureClose Non-Self-Closing Flush Mount Gate Hinge-Closer Kit includes (2) 75001213 SM AT90 S Flush Mount Hinges, (2) 7515 SureClose Flush Mount Post Mounting Brackets, and an adjusting tool.

Steel SureClose SM W Hinge was designed for large, commercial and residential gates with a point load up to 1500 lbs.

D&D SureClose EASY is an externally mounted hydraulic gate closer for center-hinge mounted gates. It is our newest compact, heavy duty, hydraulic closer that is designed for new or existing gates using center mounted pivot or barrel hinges. It can be used in many retrofit applications without the need to replace your current hinges. Easy to install, this closer mounts to the top of gates that have a gate gap from 2" - 4".

* CAUTION: When installing SureClose® Closers or Hinges to a swimming pool gate always confirm any safety requirements with your local Council or authorities to ensure compliance.*

It is designed with exceptional care and is easy to install. This top-class hinge and closer kit has the hydraulics concealed within the post, giving your gate a sophisticated look and appeal. It has a self-closing mechanism that automatically and quietly closes the door. This hinge and closer kit is easy to maintain, making it an exceptional pick for your gate.
Other features:
Incredibly easy to maintain.
Offers a simple, straightforward installation.

• Top-quality hinges ensures a smooth gate operation at all times
• High-quality construction ensures the greatest strength for long-lasting performance
• Delivers a silent, noise-free operation

The SureClose ConcealFit Hinge For Doors is a non-self-closing 125 degree hinge capable of handling doors weighing up to 220 lbs. This hydraulic door hinge features clean openings for a sleek, stylish look, along with concealed mechanisms for enhanced security and the capability to be used on both left- and right-handed swinging doors. 5year warranty.

The D&D SureClose ConcealFit Hydraulic Gate Closer and Hinge Set is designed to replace older-styled commercial gate hinges and closers. The 'Final Snap-Close Action' features an increased speed at the end of closing.

Features:

• Hydraulically Operated Hinge and Gate Closer Set
• Concealed Mechanisms Provide Burglar and Vandalism Resistance
• Provides Continuous Safe, Secure and Quiet Operation
• No Exposed Parts For Use As Climbing Footholds
• Gate Gap As Low As 5/64"
• Simple Internal Installation Within Gate and Post
• Easily Accessed, Adjustable Closing-Speed Valves
• 6 Different Adjustable Parts To Ensure Precise Installation
• Tested UL10C Fire-Rating / ADA and ANSI/BHMI Standards