Push Buttons & Touchless Entry

Product Highlights:

• Low energy, micro-processed lockout relay module
• Designed to inhibit the approach SuperScan on an automatic door with the door is used manually
• When the SuperScan is installed on a low-energy operator that is to be used manually or automatically, the 10LE21 will allow the SuperScan to be active only when the door is triggered by activating a push plate, such as on "knowing act" doors
• SuperScan will remain in the activation circuit until the door fully closes following the automatic operation of the door
• A door position switch must be used to indicate to the 10LE21 that the door has reached its fully closed position and to ignore the input of the SuperScan until the push plate activates the door again
• If the door is opened manually, the 10LE21 will prohibit the input from the SuperScan from reaching the door control
• The 10LE21 provides the hold open time delay; therefore the door control's time delay should be set to minimum

BEA’s KEYSWITCHES offers an economical and efficient solution for controlling access in a variety of security applications. Each plate is furnished with both Philips and Spanner (tamper-resistant) screws.

These low-profile, aluminum plates are designed to withstand the rigors of busy environments, while providing an aesthetically pleasing and easy to install access control device.

BEA’s BR3-X provides both simple and advanced logic controls.

Functions include: timer, ratchet / latching, inhibitor, 2 relay sequencer + inhibitor, 2 relay sequencer + door position
deactivation timer, 3 relay sequencer + “1-shot”, 3 relay sequencer with “independent relay”, interlock timer, interlock ratchet / latching, 2 way 2 relay sequence, normally locked restroom, normally unlocked restroom, 3 relay sequencer + “day / night mode”.

Common uses for the BR3-X include automatic pedestrian doors, access control, industrial automation and single-occupancy restrooms.

BEA’s Bollard Family is designed for mounting push plates, that activate automatic doors, in locations where a mounting surface is not available. This enhances accessibility for those with limited mobility or disabilities.

Bollards are compatible with a variety of push plate shapes and sizes, as well as wireless transmitters.

BEA’s Bollard Family is designed for mounting push plates, that activate automatic doors, in locations where a mounting surface is not available. This enhances accessibility for those with limited mobility or disabilities.

Bollards are compatible with a variety of push plate shapes and sizes, as well as wireless transmitters.

BEA’s Bollard Family is designed for mounting push plates, that activate automatic doors, in locations where a mounting surface is not available. This enhances accessibility for those with limited mobility or disabilities.

Bollards are compatible with a variety of push plate shapes and sizes, as well as wireless transmitters.