Search results for 'remote gate opener'

Using 1/2 HP Quadra Drive DC Motor with built-in battery backup. 115/230 VAC power input. Max. gate length = 40ft. and Max. gate weight = 1000 lbs.

***THIS OPERATOR SHIPS FREIGHT!!***

Gate Capacity: 800 lbs. max weight,14ft. max length. Solar ready, super quiet operation.

Max Weight - 800 lbs

Max Width - 10 ft

Kit Includes:

• (1) E024U Enclosure Kit
• (1) 770 Gate Arm
• (1) Support Box - STAINLESS STEEL
• (2) 12V 8Ah Batteries
• (1) 433 RC Plug In Radio Receiver
• (2) 4-Channel XT4 433 RC Transmitters
• (1) Pair of XP 30 photobeam photocells
• (2) XP 30 adapters for conduit connection

Monitored Safety Device Required

Max Weight - 900 lbs

Max Width - 10 ft

Kit Includes:

• (1) 455D Control Panel
• (1) Prewired Fiberglass Enclosure - 14"x16"
• (1) 402 CBAC Gate Arm
• (1) 433 RC Plug In Radio Receiver
• (2) 4-Channel XT4 433 RC Transmitters
• (1) Pair of XP 30 photobeam photocells
• (2) XP 30 adapters for conduit connection

Monitored Safety Device Required

Max Weight - 1760 lbs

Max Width - 16 ft

Kit Includes:

• (1) E024U Enclosure Kit
• (1) Hydraulic Manual Release
• (1) Splined shaft collar with mounting brackets
• (1) Support Box - STAINLESS STEEL
• (1) S800H SBW Gate Arm
• (2) 12V 8Ah Batteries
• (1) 433 RC Plug In Radio Receiver
• (2) 4-Channel XT4 433 RC Transmitters
• (1) Pair of XP 30 photobeam photocells
• (2) XP 30 adapters for conduit connection

Monitored Safety Device Required

Max Weight - 900 lbs

Max Width - 10 ft

Kit Includes:

• (1) 455D Control Panel
• (1) Prewired Fiberglass Enclosure - 14"x16"
• (1) 402 CBAC Gate Arm
• (1) 433 RC Plug In Radio Receiver
• (2) 4-Channel XT4 433 RC Transmitters
• (1) Pair of XP 30 photobeam photocells
• (2) XP 30 adapters for conduit connection

Monitored Safety Device Required

DKS Model 6004 swing gate operator mounts directly on a column for situations where an actuator arm cannot be used. Operates on 24 Volt DC power. Use with either the 4302-111 or 4302-112 control boxes which are powered by either 120VAC or 24VDC. Designed for residential gates up to 8 feet in length and up to 300 pounds in weight.

• Slave Arm for the Basic Single Kit or replacement arm

• Replaces # 104572

Max Weight - 900 lbs

Max Width - 10 ft

Kit Includes:

• (1) 455D Control Panel
• (1) Prewired Fiberglass Enclosure - 14"x16"
• (2) 422 CBAC Gate Arm
• (1) 433 RC Plug In Radio Receiver
• (2) 4-Channel XT4 433 RC Transmitters
• (1) Pair of XP 30 photobeam photocells
• (2) XP 30 adapters for conduit connection

Monitored Safety Device Required