Access Controls

The Doorking 1508-145 HID ProxKey II Proximity Key Tag is a proximity key-fob offering HID proximity technology in a convenient, pocket size device. It easily attaches to a key ring, badge clip or lanyard. The ProxKey II is built to withstand harsh operating environments or handling and is suitable for use in access control applications where a Photo ID is not required. Specific Code Only

DKS DoorKing 1508‐137 RF 80 ISO Graphics Cards. These cards include sequential coding, specific card numbers and specific start / stop numbering sequences(in lots of 50). Warranty: 2 year limited.Note: cards will work with the following ID‐Teck (old DKS) Prox readers only: 1815‐215, 1815‐216, 1815‐217, 1815‐218, 1815‐230, 1815‐231 (lots of 50)

26-Bit Wiegand Reader. Up to a 12-inch read range. Proximity readers are not designed for stand-alone operation and must be connected to an access controller.

26-Bit Wiegand Reader. Up to a 5-inch read range. Proximity readers are not designed for stand-alone operation and must be connected to an access controller.

These cards are factory pre-coded. Card numbers may, or may not be in numerical sequence.

FEATURES

Small, triangular shape, gray color

For key ring or keychain, or holding in fingers

Read range close to range with a proximity card

Keytag may be carried underwater for pool gates

ABS plastic material for endurance and long life

The DKS 1815-217 mounted on surface enclosure with built in intercom substation.

The RemotePro CR Series of Wiegand Output Card Readers is designed to operate as a slave unit in conjunction with American Access Systems Advantage DG card reader controller system, the AAS ProAccess 200 multi-door controller, ProAccess 8 multi-door contr

The DKS 1815-281 mounted on surface enclosure with built in intercom substation.

RF 50 Key Tags (Must order In lots of 50). These cards are factory pre‐coded. Card numbers may, or may not be, in numerical sequence. Proximity cards transmit their information to the card reader without any physical contact. This provides an easy to use vandal resistant system. Access is granted when a valid card is presented to the card reader. Warranty: 2 year limited. Passive card technology provides an unlimited number of "card reads" with no battery to wear out and, unless abused, will last virtually forever. Active Tags will provide an increased read range but use a battery that will require replacement in time (approximately 2-years). Note: cards will work with the following ID‐Teck (old DKS) Prox readers only: 1815‐215, 1815‐216, 1815‐217, 1815‐218, 1815‐230, 1815‐231